20W LED Solar Light with all in one box

20W LED Solar Light with all in one box is detailed as follows:

Brief:

Our integrated solar street light which integrates the green energy parts solar panel,LED lamp and the LiFe battery into a single product ,is with human intelligence induction system to gain the solution of low energy,long time,high-luminance and free maintenance.And the same time,it’s convenient in the shipment and installation.

Purpose:

To be installed in the garden,residential area,courtyard,road,mine area or parking area or provide the light in roads where it’s necessary,the battery provide the energy for lighting ,and the solar panel charge for the battery.

Product parts:

The product is made up with the integrated parts(solar panel ,Li-Fe battery,LED ,MPPT controller and human intelligence induction system) and the light pole.

Working characters:

The solar panel converts sunlight into electricity and stored in Li-Fe battery,vial controller,the LED light will work in night automatically by light sensor control,and provide light for the darkness area,the human intelligence induction system can save the energy when the lighting is not necessary.

Specifications:

We offer 2 years product warranty for the integrated solar light(including components), starting from the date of sales.Warranty:

Defect component will be replaced free of charge under the condition that this defect is not caused by any human
factors, including but not limited to: rough operation during transportation and installation, improper way of mounting.
Regarding the products which have exceeded warranty period, we will provide replaced components at cost price.
Replacement parts include: LED lamp, Solar controller, Battery, Sensor, Solar panel, Screws & Cable, etc.

Customized Service & OEM Brand
Custom-made solution to meet clients' different project and budget requirement:
1. Customized shell material:
High quality Aluminum alloy frame, light weight, anti-corrosion and visual good looking;
Galvanized iron frame, lower cost to reduce total budget, 3 -years corrosion resistance guarantee. Accept customized shell color.
2. Customized working method
Motion sensor, LED full power lighting when there is people/vehicle passing-by, LED 1/3 power lighting when there is no people/vehicle passing.
Induction time: 60s, sensing distance: 9-10m.
Timing control: Customize time period for different working power.
Recommended"3+4+5", first 3 hrs full power lighting, second 4 hrs 1/2 power lighting, last 5 hrs 1/3 power lighting.
3. Customized brand of components:
Solar panel: USA SUNPOWER brand solar panel(19-23% efficiency) or normal monocrystalline solar panel(17-18% efficiency).
LED lamp: High quality USA bridgelux LED chip or TAIWAN EPISTAR LED chip
Customized color temperature (2700-6500K) upon request.
Lithium battery with 5 years life time guarantee, accept customized capacity to increase lighting time.
4. Accept OEM logo printing(Qty above 50 units free of charge).
5. Mounting method: Screw and bracket fixing or Mounting tube.

Features:

1) Integrity design, no cabling, easy to install, various mounting methods (pole or fence) Pole material could be iron, wood, bamboo, plastic etc, low construction cost.
2) Adopting solar panel as power source, LED as light source, a perfect combination for energy saving.
3) Adopting high capacity long service life Lithium Iron Phosphate Battery, theory life time over 5 years, excellent high temperature performance, long life time can ensure the service life of whole product.
4) Waterproof structure, safe and reliable.
5) Adopting aluminum alloy as main body material, with excellent rust-proof and corrosion-proof function.
6) With segmented power control function, during late half night, brightness reduce in order to save energy and increase practicality.
Advantage:
This product is composed of high efficiency monocrystalline silicone solar panel,5 years extra long service life lithium battery( same with the drive batteries of  hybrid cars), high light efficiency LED lamp and intelligent controller,PIR motion sensor module,
theft-resistant mounting bracket.
The most advantage of all in one solar light is easy installation, light-weight,under general normal condition, only 1 or 2 workers using a wrench could finish the installation within 5 minutes.

  The integrated solar led street light  can used widely ,such as garden ,road ,street light.

To place the light pole into the best spot with good day lighting . The light pole should be the length 4-6m, the thickness 2.0mm with 

material iron or steel, the diameter 50-90mm The parts should be showed cleared when open the packing, the parts are show below:

Unfold the knob of fuse(see below) and take out the insulating film if the fuse socket, to check up if the fuse working right or not, then tighten. Place the lamp on the pole by its sleeve, special screw should be used and steady installation should be ensured.

For 5W-15W solar garden light

1)To place the light pole into the best spot with good day lighting .
The light pole should be the length 3-5m, the thickness 2.0mm with material iron or steel, the diameter 40-100mm.
2)Please check if the components are all here when open the packing, the components are show below.
3)Please turn on the switch before using.
4)Place the lamp on the pole by its sleeve,and make sure it is steady,then it is OK.

 For 18W-60W solar street light

1)To place the light pole into the best spot with good day lighting .
The light pole should be the length 5-7m, the thickness 2.0mm with material iron or steel, the diameter 80-110mm.
2)Please check if the components are all here when open the packing, the components are show below.
3)Unfold the knob of fuse(see below) and check if the fuse works or not,then tighten.(If not fuse,then it is switch,just turn on the switch
4)Place the lamp on the pole by its sleeve,and make sure it is steady,then it is OK.

Jinan Linquan Industry and Trade Group Co., Ltd is a comprehensive company, our business successfully integrates scientific research, production, further development and sales, Linquan industry currently includes five subsidiaries and production bases, 37 high-quality suppliers, and 19 international distributors.

Our business involves three industries: metallurgical refractory, solar energy solution and building materials.

Linquan industry firstly enter into solar energy in year 2009, have developed 6 OEM factories until now with brand of second sun, unisolar, lqsolar, sunny solar etc. Our production base for integrated solar street light is equipped with modern production equipment, aging room, automatic SMT plug-in workshop, over 8000pcs output every month.

Our integrated solar lights have been widely used in highway, street, garden, parking area, park and so on. Excellent quality and first-class service make us believed by the agents and customers all around the world.

Linquan industry is extremely strict with each production procedure, all the products must be fully tested to meet international standard before delivery.

Linquan industry has been accredited by Quality Management System certification ISO9001:2000 in 2006, TS16949
in 2007, SGS ISO14001 and OHSAS 18001 in 2008. All of our products have got approval of CE, RoHs and IP65
certificates.
Our goal is to provide high-quality products and services to clients, and strive to become the large-scale international company in the particular fields as stated above. We believe that through excellence and innovation while keeping good faith and raditional morals in doing business, Linquan can achieve high-speed development and satisfy the interests of our shareholders, employees and the society.