Name: 10a 20a 30a 12v 24v solar lighting controller
Brand: kaich
Availability: InStock

Product Details

12V 170W / 24V 340W solar street light charge controller

1.Product Parameters


Rated charging/discharging current	10A			20A
Load circuit numbers	Single	Double		Single	Double
The Max solar panel power	12V 170Wp/24V 340Wp			12V 340W/24V 680W
Protection grade	IP67(Waterproof glue)
System voltage	12V/24V AUTO
Free load current	≤8mA
Working environment temperature	Industrial grade; -35℃ to +80℃
Average charged voltage of the storage battery	14.4V		These initial default values for 12V system can beseparately set by PC software; When the controller is in the operation, it will automatically check the voltage value of photovoltaic system. If it is judged as 24V system, these parameters will automatically increase by relevant multiples.
Over discharge protection voltage of storage battery	11.0V
Over discharge recovery voltage of storage battery	12.3V
The voltage of opening light	5.0V
Time control point setting	6hours (Initial default values, setting by PC software)

Product Application:

Electronic Protections:
·PV array short circuit
·Over discharging
·Over charging
·Load overload
·Load short circuit
·PV reverse polarity
·Battery reverse polarity

Setting instruction data

LED1 Display	Mode	LED 2 Display	parameter
1.	Working with 100% power	0 – 4.	Working for 0-14 hours with 100% power
2.	Working with 75% power	0 – 4.	Working for 0-14 hours with 75% power
3.	Working with 50% power	0 – 4.	Working for 0-14 hours with 50% power
4.	Light open again in earlier morning	0 – 4.	Working for 0-14 hours with 50% power
5.	Power optional in earlier morning	1~4	1 The working power is 100% 2 The working power is 75% 3 The working power is 50% 4 The working power is 25%
6.	Demo mode	0 – 4	0 load is off 1 load works with 100% power 2 load works with 75% power 3 load works with 50% power 4 load works with 25% pow