Specifications
Construction Light Tower Diesel Generator 30KW/37.5KVA1.Lifted by air;Automatic streching
2.Coppe
Construction Light Tower Diesel Generator 30KW/37.5KVA
Light Tower Specifications
Model | EPL-400 |
Dry weight of light tower(kg) | 90 |
Gross weight of light tower(kg) | 100 |
Lamp power W-No. of lamp | 400*4 |
Total power of the lamps W | 1600 |
Luminous flux lm | 160000 |
Lifting limit of the mast m | 4.5 |
Mast | Trail type, three stages pneumatic lifting mast |
Inclination | ≤10degree |
Windproof ability | ≤6 grade |
Metal Halide Lamps
LED Lamps
Genset Main Specifications |
3-PH, 50Hz@1500RPM, 220 (Also Can Be Made According To Customers’ Special Requirements)
1.Composed of 186FA diesel engine and China Alternator
2.12V DC start motor and storage battery
3.Brush, Self-excited, IP20, insulation class F alternator
4.Key start panel control system as standard, digital auto-start panel is optional
5.8-hour operationTOP tank
6.Optional open type or silent type
7.All generator sets are gone through rigorous testing before being released to the market place, including 50% load, 75% load, 100% load, 110% load and all protection function (overspeed stop, high water temperature, low oil pressure, battery charging fail, emergency stop)
Prime Power | 30KW/37.5KVA | Standby Power | 33KW/41.3KVA |
Rated Speed | 1500RPM | Output Frequency | 50HZ |
Phase | 3 | Rated Voltage | 380V |
Engine Model | 4DX22-50D | Alternator Model | 184H |
Noise(7m)dB(A) | 68 | Fuel Consumption (g/kw.h) | 220 |
Voltage Regulation Rate | ≤±1% | Random Voltage Rate | ≤±1% |
Frequency Regulation Rate | ≤±5% | Random Frequency Variation | ≤±0.5% |
Dimension (Open type) | 2000X850X850 (mm) | Weight (silent type) | 730kg |
Prime Power:
This rating is for the supply of continuous electrical power (at variable load). There is no limit on the annul hours of operation and 10% overload power can be supplied for 1 hour in 12.
Standby Power:
This rating is for the supply of continuous electrical power (at variable load) in the event of a utility power failure. No overload is permitted.
Rated Voltage:
Available with customer requirements.
Engine Specifications |
Diesel Engine
Engine Model | 4DX22-50D |
Number of Cylinder | Four |
Cylinder arrangement | Vertical in-line |
Cycle | Four Stroke |
Aspiration | Turbocharged |
Bore×Stroke (mm×mm) | 102*118 |
Fuel Consumption (g/kw.h) | 240 |
Fan Consumption (KW) | 2.5 |
Total Displacement(ml) | 3860 |
Compression Ratio | 17:1 |
Cooling Method | Water Cooled |
Speed Governor | Mechanical |
Start patten | Electric |
Fuel | 0#(summer)-10#(winter)-35#(severe cold) |
Lubrication Oil | L-ECD grade 15W30 or 15W40 |
Start Moto Capacity | 24V-4.5KW |
Charge Alternator Capacity | 28V-1000W |
Alternator Specifications |
Alternator Model | 184H |
Alternator Brand | Stamford |
Exciter Type | Brushless, Self-excited |
Rated Output | 30kw |
Rated Speed | 1500RPM |
Rated Frequency | 50HZ |
Phase | Three |
Rated Voltage | 230V (Available with customer requirements) |
Power Factor | 0.8 |
Voltage Adjust Range | ≥5% |
Voltage Regulation NL-FL | ≤±1% |
Insulation Grade | F |
Protection Grade | IP23 |
Control System |
170 Genset Controller
170 Genset Controller | |
| The 170 is available in Manual and Auto Start versions including all the features of the TX 170 plus a tamper proof engine hours Counter.
Both modules include a remote start signal input. This input allows the module to be started from a pre-defined remote location.
|
Specifications:
DC Supply
8V to 35V continuous
Cranking Droputs
Able to survive 0V for 50mS, providing supply was at least 10V before dropout and supply recovers to 5V. This is achieved without the need for internal batteries.
Alternator Input Frequency
50Hz – 60Hz at rated engine speed (minimum:15V Overspeed: nominal frequency +14% (+24% overshoot)
Alternator Input Range
15-305 V AC RMS (+20%)
Start Output
Solid state 1.2A negative grounding
Run Output
Solid state 1.2A negative grounding terminal
Pre-heat Output
Solid state 1.2A negative grounding terminal
170 Dimensions
84mm x 72mm x 34.9mm
3.3” x 2.8” x 1.4”
Excludes key switch
170 Cut Out
80mm x 68mm
3.1” x 2.7”
FACTORY:
Attending Fairs:
CE,ISO&.PATENT:
CONTACT ME!