Specifications

1600W Light Tower 20KW/25KVA Diesel Generator
1.Lifted by air;Automatic streching
2.Halide or LED Lamps
3.Copper

1600W Light Tower 20KW/25KVA Diesel Generator

Light Tower Specifications

Model	EPL-400
Dry weight of light tower(kg)	90
Gross weight of light tower(kg)	100
Lamp power W-No. of lamp	400*4
Total power of the lamps W	1600
Luminous flux lm	160000
Lifting limit of the mast m	4.5
Mast	Trail type, three stages pneumatic lifting mast
Inclination	≤10degree
Windproof ability	≤6 grade

 

 

Metal Halide Lamps

LED Lamps

Genset Main Specifications

3-PH, 50Hz@1500RPM, 220 (Also Can Be Made According To Customers’ Special Requirements)

1.Composed of 186FA diesel engine and China Alternator

2.12V DC start motor and storage battery

3.Brush, Self-excited, IP20, insulation class F alternator

4.Key start panel control system as standard, digital auto-start panel is optional

5.8-hour operationTOP tank

6.Optional open type or silent type

7.All generator sets are gone through rigorous testing before being released to the market place, including 50% load, 75% load, 100% load, 110% load and all protection function (overspeed stop, high water temperature, low oil pressure, battery charging fail, emergency stop)

 

 

Prime Power	20KW/25KVA	Standby Power	22KW/27.5KVA
Rated Speed	1500RPM	Output Frequency	50HZ
Phase	3	Rated Voltage	380V
Engine Model	4DW92-35D	Alternator Model	184F
Noise(7m)dB(A)	68	Fuel Consumption (g/kw.h)	240
Voltage Regulation Rate	≤±1%	Random Voltage Rate	≤±1%
Frequency Regulation Rate	≤±5%	Random Frequency Variation	≤±0.5%
Dimension (silent type)	1750X750X800 (mm)	Weight (silent type)	500kg

 

  

 

Prime Power:

This rating is for the supply of continuous electrical power (at variable load). There is no limit on the annul hours of operation and 10% overload power can be supplied for 1 hour in 12.

Standby Power:

This rating is for the supply of continuous electrical power (at variable load) in the event of a utility power failure. No overload is permitted.

Rated Voltage:

Available with customer requirements.

 

Engine Specifications

Diesel Engine

 

Engine Model	4DW92-35D
Number of Cylinder	Four
Cylinder arrangement	Vertical in-line
Cycle	Four Stroke
Aspiration	Turbocharged
Bore×Stroke (mm×mm)	90×100
Fuel Consumption (g/kw.h)	230
Fan Consumption (KW)	1.8
Total Displacement(ml)	2540
Compression Ratio	17:1
Cooling Method	Water Cooled
Speed Governor	Mechanical
Start patten	Electric
Fuel	0#(summer)-10#(winter)-35#(severe cold)
Lubrication Oil	L-ECD grade 15W30 or 15W40
Start Moto Capacity	12V-3.5KW
Charge Alternator Capacity	14V-500W

 

  

 

Alternator Specifications

 

 

Alternator Model	184F
Alternator Brand	Stamford
Exciter Type	Brushless, Self-excited
Rated Output	20kw
Rated Speed	1500RPM
Rated Frequency	50HZ
Phase	Three
Rated Voltage	230V (Available with customer requirements)
Power Factor	0.8
Voltage Adjust Range	≥5%
Voltage Regulation NL-FL	≤±1%
Insulation Grade	F
Protection Grade	IP23

 

 

 

 

 

Control System

170 Genset Controller

170 Genset Controller
	The 170 is available in Manual and Auto Start versions including all the features of the TX 170 plus a tamper proof engine hours Counter.   Both modules include a remote start signal input. This input allows the module to be started from a pre-defined remote location.

Specifications:

DC Supply

8V to 35V continuous

Cranking Droputs

Able to survive 0V for 50mS, providing supply was at least 10V before dropout and supply recovers to 5V. This is achieved without the need for internal batteries.

Alternator Input Frequency

50Hz – 60Hz at rated engine speed (minimum:15V Overspeed: nominal frequency +14% (+24% overshoot)

Alternator Input Range

15-305 V AC RMS (+20%)

Start Output

Solid state 1.2A negative grounding

Run Output

Solid state 1.2A negative grounding terminal

Pre-heat Output

Solid state 1.2A negative grounding terminal

170 Dimensions

84mm x 72mm x 34.9mm

3.3” x 2.8” x 1.4”

Excludes key switch

170 Cut Out

80mm x 68mm

3.1” x 2.7”

 

 

FACTORY:

Attending Fairs:

CE,ISO&.PATENT: