Product Details

China Good Quality Wedge Anchor with Zinc Plated

Technical Data

Diameter	M6-M24(1/4” to 1-1/4”)
Length	40mm-440mm (1-3/4” to 12”)
Capacity	3.6-18.3KN. (1770-27845LBS.)
Standard	DIN, ANSI,ASTM, JIS, GB,etc
Material	Steel/Carbon Steel /Stainless Steel
Surface	Zinc Plated/Hot Dipped/Mechanical Galvanising
Thread	Metric,UNC,UNF,BSW,RD
Color	Yellow/ Blue and White

Product Description

The wedge anchor consists of two pieces permanently preassembled into a single unit.

The carbon steel rod is threaded for a portion of its length.

The extreme end of the threaded portion is rounded to protect the threads from damage while the anchor is being driven into the hole drilled in the concrete.

The other end of the rod has a necked down diameter, which runs for a short distance, at the end of which it tapers outwardly to the full diameter of the rod.

A precision formed universal clip made of carbon steel is permanently assembled around the necked down diameter to complete the anchor.

Each package contains the correct number of nuts and washers.

Base Material

Cracked Concrete

Uncracked Concrete

Steel structure

Rilings

Cntilever Backet

Ecalator

Crtain wall

Dors and Wndows

Mchanical Euipment

Cble Tay

Woden Sructure

Installation Instructions

1. Drill a hole in the concrete using a hammer drill and a carbide tipped masonry drill bit conforming to ANSI B94, 12-77,the same diameter as the wedge anchor. If the fixture being fastened is in place and being used as a template to locate the hole for the anchor, the mounting hole in the fixture should afford clearance for the universal wedge clip on the stud.

2. Clear the hole of all debris

3. Place the wedge anchor through the hole in the fixture or directly into the concrete, and hammer it in to the drilled hole, ensuring that they are installed to the desired depth.

4. Turn the nut by hand until the unit is "snugged up". Tighten the nut with a torque wrench to ensure they are tightened to the required torque value.

Product Advantages

1. ISO9001:2000 Certified ,CE, GS

2. Quality Control inspection Before Shipment

3. Appearance: Bright neat body, without any burrs

4. Tolerances: Precision Tolerances to Customer Specification

5. Non-standard/ OEM/ODM/customized service provided

6.The longer thread interval makes a variety of thickness of anchorage possible

7. Electro-galvanizing offers maximum bearing capacity in non-cracking concrete, making full use of the intension of substrate

8. Flexible, can be used on the smaller surface or close to the edge

9. When the diameter of anchor is 8mm to 16mm or meeting steel bar during the installation, the depth of drilling hole can be decreased

10. Anti-seismic, anti-aging, high-temperature resistance, weather resistance, resistance to fracture

Specifications Model

A. MM

CODE	SIZE	THREAD LEN.	MINIMUM EMB.	TENSIONS(KN.)**
WA06040	M6x40	20mm	30mm	3.6
WA06050	M6x50	30mm
WA06055	M6x55	35mm
WA06065	M6x65	35mm
WA06070	M6x70	40mm
WA06080	M6x80	60mm
WA06090	M6x90	70mm
WA06095	M6x95	75mm
WA06100	M6x100	80mm
WA06120	M6x120	95mm
WA08050	M8x50	20mm	35mm	5.7
WA08060	M8x60	30mm
WA08070	M8x70	40mm
WA08075	M8x75	45mm
WA08080	M8x80	50mm
WA08085	M8x85	55mm
WA08090	M8x90	60mm
WA08095	M8x95	65mm
WA08100	M8x100	70mm
WA08105	M8x105	70mm
WA08110	M8x110	75mm
WA08115	M8x115	85mm
WA08120	M8x120	85mm
WA08130	M8x130	95mm
WA08150	M8x150	115mm
WA08160	M8x160	125mm
WA08165	M8x165	130mm
WA10060	M10x60	20mm	45mm	7.6
WA10066	M10x65	25mm
WA10070	M10x70	30mm
WA10080	M10x80	40mm
WA10095	M10x95	55mm
WA10100	M10x100	60mm
WA10110	M10x110	70mm
WA10115	M10x115	70mm
WA10120	M10x120	75mm
WA10125	M10x125	80mm
WA10130	M10x130	85mm
WA10140	M10x140	95mm
WA10150	M10x150	105mm
WA10160	M10x160	115mm
WA10170	M10x170	125mm
WA10180	M10x180	135mm
WA10210	M10x210	165mm
WA12080	M12x80	30mm	60mm	8.3
WA12110	M12x110	60mm
WA12125	M12x125	75mm
WA12145	M12x145	95mm
WA12165	M12x165	125mm
WA12185	M12x185	135mm
WA12200	M12x200	145mm
WA12220	M12x220	165mm
WA12240	M12x240	195mm
WA12260	M12x260	205mm
WA12280	M12x280	225mm
WA12300	M12x300	245mm
WA12330	M12x330	275mm
WA12360	M12x360	305mm
WA16090	M16x90	30mm	75mm	9.9
WA16115	M16x115	55mm
WA16130	M16x130	70mm
WA16145	M16x145	85mm
WA16160	M16x160	100mm
WA16180	M16x180	120mm
WA16220	M16x220	155mm
WA16240	M16x240	175mm
WA16260	M16x260	195mm
WA16280	M16x280	215mm
WA16300	M16x300	235mm
WA16330	M16x330	265mm
WA16440	M16x440	370mm
WA20130	M20x130	60mm	85mm	16.5
WA20160	M20x160	90mm
WA20200	M20x200	130mm
WA20270	M20x270	200mm
WA24180	M24x180	100mm	105mm	18.3
WA24260	M24x260	180mm	105mm	18.3

B. I NCH

CODE	SIZE	THREAD LEN.	MINIMUN EMB.	TENSION(LBS.)**
WA14134	1/4" x 1-3/4"	3/4"	1-1/8"	1771
WA14214	1/4" x 2-1/4"	1-1/4"
WA14314	1/4" x 3-1/4"	2-1/4"
WA38214	3/8" x 2-1/4"	1-1/4"	1-5/8"	3636
WA38234	3/8" x 2-3/4"	1-5/8"
WA383	3/8" x 3"	1-7/8"
WA38312	3/8" x 3-1/2"	2-3/8"
WA38334	3/8" x 3-3/4"	2-5/8"
WA385	3/8" x 5"	3-7/8"		5653
WA387	3/8" x 7"	5-7/8"		6328
WA12234	1/2" x 2-3/4"	1-3/8"	2-1/4"	6714
WA12334	1/2" x 3-3/4"	2-3/8"
WA12412	1/2" x 4-1/2"	3-1/8"
WA12512	1/2" x 5-1/2"	4-1/8"		8942
WA127	1/2" x 7"	5-5/8"		8942
WA12812	1/2" x 8-1/2"	7-1/8"		10175
WA58312	5/8" x 3-1/2"	2"	2-3/4"	8747
WA58412	5/8" x 4-1/2"	3"
WA585	5/8" x 5"	3-1/2"
WA586	5/8" x 6"	4-1/2"
WA587	5/8" x 7"	5-1/2"		15590
WA58812	5/8" x 8-1/2"	7"		16710
WA5810	5/8" x 10"	8-1/2"		16710
WA34414	3/4" x 4-1/4"	2-3/8"	3-3/8"	11314
WA34434	3/4" x 4-3/4"	2-7/8"
WA34512	3/4" x 5-1/2"	3-5/8"
WA34614	3/4" x 6-1/4"	4-3/8"
WA347	3/4" x 7"	5-1/8"
WA34812	3/4" x 8-1/2"	6-5/8"		18408
WA3410	3/4" x 10"	8-1/8"		19805
WA3412	3/4" x 12"	10-1/8"		19805
WA786	7/8" x 6"	2-3/4"	3-7/8"	16534
WA788	7/8" x 8"	4-3/4"		16534
WA7810	7/8" x 10"	6-3/4"		18250
WA16	1" x 6"	2-3/8"	4-1/2"	18250
WA19	1" x 9"	5-3/8"		18250
WA112	1" x 12"	8-3/8"		26726
WA1149	1-1/4" x 9"	4-3/4"	5-1/2"	22971
WA11412	1-1/4" x 12"	7-3/4"	5-1/2"	27845

** Tabulated load values are for anchors installed in concrete(Concrete C20/25). Concrete compressive strength must be at the specified minimum at the time of installation.