Name: Automatic Cold Bending Roll Forming Making Machine
Brand: Dongchang
Availability: InStock

Product Details

Automatic Cold Bending Roll Forming Making Machine

Technical Parameter:

Technical parameter for metal sheet bending machine
1	Name	metal steel sheet bending machine
2	Raw material	steel/alloy steel /aluminum
3	Hydraulic motor power	3-5.5kw
4	Hydraulic pump adjustable range	1-20 mpa
5	Oil cylinder pressure	16-40 tons
6	Angle of bending	45-135 degree
7	Mould material	Cr12 high strength alloy steel
8	Control system	PLC
9	Voltage	380/220v/50hz
10	Certificates	ISO 9001:2000
11	Warranty	12 months
12	Delivery time	3-7 days
13	Max bending thickness	3.5mm
14	Max bending length	6000mm
15	Machine length	6000mm
16	Machine width	1200mm
17	Machine height	2200mm
18	Machine weight	1200-3000kg

Operation approach:

1.The first is connected the power,open the key switch on the control panel,and then press the oil pump start-up,so you can hear the voice of oil pump rotation.(the machine does not move now)

2.Stroke adjustment,bending machine use must pay attention to adjust trip,before bending you must have a test.bending machine die downward to the bottom must ensure that there have a thick clearance,otherwise it will cause damage to the mold and machine.

3.The bending groove,general to choose the plate thickness is 8 times the width of the notch.such as plate bending 4mm,need to choose about 32mm slot.

4.Block material after adjustment generally has electric rapid adjustment and manual fine tuning,same as the shearing machine.

5.Depress the pedal switch started to bend,the bending machine have different with cutting machine,the bending machine can loosen at any time,when you loose feet the bending machine will stop,continue for down on.

Our Advantage

1.Our company produce many kinds of bending machine,the customers can choose different machines according to the different price points and use.

2.We can supply ample molds,the molds all made from high strength and high wear resistance Cr12 steel,the molds can endure high strength and frequency usage.

3.The frame of the machine is made from 350# H-shape steel and U-steel welding,high hardness,no distortion.

4.The installation and use of the bending machine is very simple,only need one worker to operate it.

5.We have experienced technical staff,we can produce special machines according to the different requirements of yours.

6.Our delivery time is very rapid,we can arrange transportation to any country.

Machine photos

Other Machine

1. Double Layer Roll Forming Machine

2. Glazed tile roll forming machine

3. Roof Ridge Roll Forming Machine

4. Floor Deck Roll Forming Machine

5. C/Z/U Purlin Roll Forming Machine

Company Information

Since 2005 until today specializing in the production of more than 10 days ,now Botou Dongchang Machinery Manufacture Co., Ltd.has exported high quality Roofing Shingles Making Machine to more than 15countries, which includes: South Africa, Tanzania, Australia, India, Indonesia, Iran, Macedonia, Ghana, Trinidad and Tobago, Sri Lanka, Sudan, Guyana, America, Abidjan, Kazakhstan, Nigeria, Bolivia, Bengal, Chile, Armenia, the UK, GHANA and so on. Lean upon professional design, precise fabrication and experienced assembly, we always supply both standard and customized products in high quality. With a decade of experience in exporting ISO and BV certificated products all over the world, we could be your reliable supplier for long-term cooperation.

If you have any questions for the Roofing roll forming Machine, send your Inquiry Details in the Below, Click "Send" Now!We will be 24 hours services for you .