Specifications

corn stalk briquetting machine:
1) factory sale.
2)CE and ISO certificates.
3)professional and reliable service.

 

Professional manufacturer directly sale corn stalk briquetting machine 

 

 

 

There are two kinds corn stalk briquetting machines in our factory, they are ring die 

 

corn stalk briquetting machine and flat die corn stalk briquetting machine.

 

 

 

Type-1. Ring die corn stalk briquetting machine

 

Introduction:

 

Our ring die corn stalk briquetting machine consists of shaping roller mold, electricity

 

board, shaping press, conveyor, etc. Our ring die corn stalk briquetting machine can

 

shape fine corn stalk powder into pellet shape. Except corn stalk, our ring die corn

 

stalk briquetting machine's raw material also can be dry grass, waste paper, leaves,

 

rice husk, wheat husk, sorghum stalk, cotton stalk, bean stalk, etc. into small square

 

shape or cylinder pellet shape. Because of tremendous pressure, our final pellets are

 

in rather high density, long burning time, stable performance, etc.(corn stalk briquette

 

machine)

 

Our ring die corn stalk briquetting machine has large production capacity, according to

 

various raw material and final smaple's dimensiaon, our ring die corn stalk briquetting

 

machine can make 200-3000kg wood pellet per hour. (corn stalk briquetting machine)

 

 

 

 

 

 

Type-2. Flat die corn stalk briquetting machine

 

Introduction:

 

 

 

Flat die corn stalk briquetting machine is used to press fine dry corn stalk powder

 

whose dimension less than 3mm into small pellet size. The final pellet dimension

 

can be 10-30mm in diameter. Raw material of flat die corn stalk briquetting machine

 

is not only corn stalk powder, but also cotton stalk powder, bark powder, leaves

 

powder, rice husk, wheat husk, sorghum stalk, corn stalk, waste paper powder,

 

sawdust powder, etc. The final pellet is used as biomass fuel, or fertilizer, etc.

 

(corn stalk briquetting machine)

 

 

 

 

 

 

Straw pellets made by corn stalk briquetting machine

 

 

 

 

 

 

 

 

Type-3: Screw type corn stalk briquetting machine

 

 Introduction

 

 

Screw type corn stalk briquetting machine is different from above two kinds corn stalk briquetting

 

machines. This type corn stalk briquetting machine consists of screw propeller, heating rings,

 

shaping mold, motor power, etc. After fine corn stalk powder whose dimension less than 3mm

 

feeded into feeding port, propeller will forced fine powder into shaping mold, and under high

 

temperature and pressure, fine corn stalk powder will be shaped into corn stalk logs. Diameter 

 

of straw stalk logs' diameter is 40-80mm, length is 400-800mm.(corn stalk briquetting machine)

 

 

 

Wood briquettes made by corn stalk briquetting machine

 

 

 

 

Spare parts of corn stalk briquetting machine

 

1.Vertical feeding directly in place.

 

2.Die static,roller rotating,material centrifugal,evenly distributed around.

 

3.Double-layer dies,up and dowm dual-use,reduce the cost,enhence the effiency.

 

4.One die,different hole diameters,with different specification to pelletize.

 

5.Ring die ,vertical structure.doog for cooling the pelletzing room.

 

6.Independent and frequency conversion discharge device,to ensure that the rate of pellet

 

formation.

 

7.Macroporous die,wire joining circulai tube ,increasing travel ,improving density.(corn stalk

 

briquetting machine)

 

 

 

 

 

 

 

Characteristics of corn stalk briquetting machine

 

1) High quliaty and high production capacity.

 

2) Factory direct sale.

 

3) Reliable service.

 

4) Durable structure.

 

5) Provide you the whole production line.

 

6) Vrious corn stalk briquetting machine.(corn stalk briquetting machine)

 

 

Parameters of ring die corn stalk briquetting machine

 

 

Model	Power	Capacity	Dimension (CM)	Weight (KG)
LTP-350	30KW	300-500 KG/H	165*70*130	1000
LTP-450	37KW	500-700 KG/H	130*70*150	1450
LTP-550	45KW	800-1000 KG/H	140*75*160	2000
LTP-800	90KW	1500-2000 KG/H	190*100*200	3900
LTP-1000	110KW	2000-3000 KG/H	210*115*205	4800

 

 

Visitors came to our factory to test our corn stalk briquetting machine

 

 

 

 

 

How to choose the most suitable corn stalk briquetting machine

 

In order to provide you the most suitable corn stalk briquetting machine with the most suitable 

 

production capacity, could you please share me the following information? 

 

1)  What's your raw material? 

 

Our straw pellet machine is suitable for rice straw, corn straw, peanut straw, wheat straw,

 

bean straw, sorghum stalk, cotton stalk, leaves, dry grass, etc. low density raw material.

 

2) How many kilograms corn stalk briquetting do you want to make per hour?

 

Our corn stalk briquetting machine and wood briquette machine's production capacity is 

 

between 200-3000kg/h.(corn stalk briquetting machine)

 

Our factory information:

 

Address: Gongyi City, Zhengzhou City, Henan Province, China.

 

Airport Information: CGO ( Zhengzhou Xinzheng International Airport)

 

We will pick you up at the airport, and direct send you to our factory!

 

 

 

If you are interested in our corn stalk briquetting machine, please contact me freely!

 

 

 

Our factory show