Specifications

brick manufacturing machine:
1) 30 years' development
2) 6 years' export experience
3) reliable service

 

High quality high efficiency brick manufacturing machine

 

 

Brick manufacturing machine

 

 

 

 

 

Work site of brick manufacturing machine

 

 

 

Brief introduction of brick manufacturing machine

 

Brick manufacturing machine means to make bricks by using mechanical equipment. The raw material of 

brick manufacturing machine is to make brick are mountain flour, coal ash, furnace clinker, clay, macadam,

sand, with water. Norally, we use clay as our main raw material. Brick making machine price production 

process is very simple. Using mixer to mix clay and sand , mountain flour evenly. Then, using belt conveyor

to convey these mixed raw material into vacuum brick exrtuder machine to make formed tile. After the formed

tile coming out, brick cutter will cut formed tile into small bricks, then the brick stacker will put bricks into kiln

cars. At last, bricks will be sent into kiln to be burned. (brick manufacturing machine)

 

Characteristics of brick manufacturing machine

 

1. For doubles shaft mixer blades, we choose 45 Carbon steel.

2. For roller crusher ,we use high manganese

3. Steel axles, gear and other important spare parts which are made by carbon steel and alloy steel through

modulation or quench’s heat treatment procession so as to extend the service life.

4. Advanced technology: we adopt Germany technology, which has stable running process.

5. Longer service life: Low gravity center, the vibration table is only 486mm from the ground. Which ensure 

90% aftershocks into the ground to enlarge brick making machine price's service life.

6. Adopts pressure separation technology.(brick manufacturing machine)

 

Different bricks made by brick making manufacturing machine

 

 

 

 

 

The whole line of brick manufacturing machine

 

Brick manufacturing machine line includes box feeder→ Roller crusher/ Jaw crusher→Double shaft mixer→

Finess crusher→ Extrudering mixer →Brick manufacturing machine→ Brick slitter→ Brick cutter→Brick

Stacker→Kiln Car → Kiln.(brick manufacturing machine)

 

1. Raw material & fuel preparation and handling

 1)Send clay raw material to box feeder with loader. Send the clay raw material to double-roll crusher for

preliminary crushing .

 2)Preliminary crushed material is conveyed to twin-shaft mixing machine for adding water and agitating

through belt conveyer. 

 3)After mixing of the first working procedure, the raw material is again sent to intense agitation extruder

and high speed fine pulverizing double roll grinder for supplement water and agitating the raw material. 

(brick manufacturing machine)

 

 2. Molding

1)The molding water content rate should be controlled within 16%-18%. 

 2)The vacuum pump will take out the air that entered into the extruding machine together with pug. The

brick manufacturing machine will extrude the pug from machine mouth and then, carry out slitting & parting

according to the required dimension.(brick manufacturing machine)

 

 3. Drying

1)When the unfired bricks cut by cutter and arranged into groups. 

2) The drying chamber work system has heating system, regulating system and moisture excluding system.

The drying quality is controlled by regulating system. clay brick machine.(brick manufacturing machine)

 

 4. Burning

1)After drying , the unfired bricks are sent onto  kiln by the dried brick cart,stacking bricks onto the kiln car 

for burning. 

2)unloading system The properly burned bricks.(brick manufacturing machine)

 

 

 

Main parameter of brick manufacturing machine

 

Type	Diameter of reamer of extruding end (mm)	Capacity (pieces(standard brick size)/h)	Authorized pressure(Mpa)	Vacuum Degree(Mpa)	Installed capacity(kw)	Dimension(mm)
JKY70/70-2.5	700	19000~24500	2.5	-0.092	250+90+1.5	6687×6765×2846
JKY70/60-3.8	600	14000~15000	3.8	-0.092	250+90+2.2	6632×6855×2866
JKY60/60-4.0	600	21000~24480	4.0	-0.092	250+90+7.5+1.5	4819×6416×3065
JKY60/50-4.0	500	12000~18000	4.0	-0.092	200+75+1.5	5844×6102×2796
JKY50/50-4.0	500	12200~13420	4.0	-0.092	200+90+7.5+1.5	6904×5352×2820
JKB50/45-3.0	450	9800~15100	3.0	-0.092	132+55	5375×4521×2723
JKR50/45-2.0	450	12000~16000	2.0	-0.092	110+55	4900×4204×2723

 

Installation of brick manufacturing machine

 

1) Brick manufacturing machine should be installed in a horizontal concrete, fixed by foundation bolt.

2) Brick manufacturing machine's main body should be located vertically with ground.

3) After brick manufacturing machine and its assistant equipments being installed, we should check

each part, each bolt, host storehouse do or to see whether ther are tight or not.

4) Confirming the power and control switch according to brick manufacturing machine and its assistant

machine's power.

5) Check finished, we should have a empty load test first. If the test is ok, we can make normal production.

 

Work site of brick manufacturing machine show:

 

 

 

 

How to choose the most suitable brick manufacturing machine

 

1) At first, I need to know your raw material. 

2) Second, I need to know the brick size, shape.

3) Third, I need to know how many pieces your will make per hour or per day.

4) Fourth, what/s your bricks' application?(brick manufacturing machine)

 

Operation of brick manufacturing machine

 

1) Before starting, we should check clutch, brake, steel wire rope, etc. and ensure there is nothing in the drum.

2) Pay attention to the feeding hopper, when it is raising, forbid anyone walk though or stay under the hopper.

3) When the brick manufacturing machine's running process, forbid to use any kinds tools into the cylinder.

4) Forbid anyone leave the worksite during the running process.

5) Cut the electricity and fix the hopper when you need to check brick manufacturing machine line.

6) Only professional woker can operate this brick manufacturing machine.

 

Delivery site of brick manufacturing machine

 

 

Visitors came to our factory to test brick manufacturing machine

 

 

Our service:

 

Before-sale services:

(1) tell customer how to build new brick factory, including brick manufacturing machine, drying and firing.

(Confirm clay,power electricity,water,land area, fund)

(2) Guide customers to choose the best and economic plant, recover the investment within short time.

(3) site inspection.(brick manufacturing machine)

 

In-Sale services:

(1)Quality of machines for making bricks control must be inspected strictly

(2)In accordance with the agreements stipulated in the contract.(brick manufacturing machine)

 

After-sale services:

(1) We will send the technicians about brick manufacturing machine to guide with device installation,

debugging and training operators until customers are fully satisfied.

(2) Guarantee for brick manufacturing machine materials and equipment supplied under this quotation

are valid for a period of 12 months after commissioning or 16 months after delivery whichever is earlier.

Warranty shall cover manufacturing defect in material and workmanship but exclude:1. Daily wear and

tear 2.mishandling or improper operation3. Incoming power supply fluctuation.(brick manufacturing

machine)

 

Contact: