Product Details

Product Description

Our Services

Company Information

Case

Overview:

CW-801 is a powerful device for vehicle tracking. It supports fast TTFF and quad-band GSM frequency. It has multiple input/output interfaces to monitor and control vehicle circuit. It can connect serial digital camera and dispatch LCD screen.

Features:

High sensitive SiRF GPS chipsets and advanced quad-band GSM module as well as high-performance NXP ARM MCU;

Track by SMS or GPRS;

Track on Google map, Google earth and E-map;

SOS alarm, speeding alarm, geo-fence alarm, idling alarm, fatigue alarm and external power alarm;

Odometer statistics;

Detect ACC, doors or load etc;

Cut off engine remotely;

Flash;

Two-way conversation;

Connect dispatch LCD screen or digital serial camera;

Wide working voltage: DC 9-32V;

Instant high voltage and reverse polarity connection protection;

Internal backup batteries;

Set parameters by LCD, SMS or GPRS;

Update firmware by cable or GPRS;

GPRS protocol: TCP or UDP;

Waterproof and dustproof case;

CE and RoHS certificates.

Specifications:

GPS Specifications
GPS Chipset	SiRF
Frequency	L1 frequency band, C/A code, 48 channels
Sensitivity	Tracking: -163dBm Acquisition: -160dBm
Accuracy	Position: 5m CEP without SA Velocity: 0.1m/s without SA Timing(PPS): 60ns RMS
Acquisition Time	Cold Start: 30s Warm Start: 22s Hot Start: 1s Re-acquisition: <1s
Datum	WGS-84
SBAS	WAAS, EGNOS, NSAS

GSM Specifications
Frequency	Quad-Band: 850/900/1800/1900MHz Compliant to GSM/GPRS phase2/2+ EGSM900/GSM850 class4(2W) GSM1800/GSM1900 class1(1W)
GPRS	GPRS multi-slot class 10 GPRS mobile station class B
Receiving Sensitivity	<-107dBm

Interface
Analog Input	One analog input (PIN 13) for fuel sensor
Digital Input	One negative trigger input (PIN 16) for panic button, two positive trigger inputs (PIN 7 and PIN 19) to detect ACC, doors or load etc
Digital Output	One digital output (PIN 8) to control engine or doors etc
Two-Way Audio	PIN 5 and PIN 15 for microphone, PIN4 and PIN 14 for horn
Serial Port	One RS-232 port for camera or LCD
GPS Antenna	External
GSM Antenna	External

Air Interface Protocol
Transmit Protocol	TCP, UDP, SMS
Schedule Timing Report	Position report at preset time interval
SOS Alarm	Press panic button for emergent rescue
Speeding Alarm	Alarm once over preset speed
Geo-Fence Alarm	Alarm once entering or leaving assigned area
Idling Alarm	Alarm when engine is on for a long time but vehicle is static
Fatigue Alarm	Alarm when vehicle has run for a long time
External Power Alarm	Alarm once external power disconnecting
Remote Control	Control the digital output through air interface protocol

General Specifications
MCU	NXP ARM Cortex M3
Sensor	Fuel sensor, accelerator sensor and rotation sensor (optional)
Casing	Aluminium alloy, waterproof and dustproof
Backup Battery	Internal 6V NiMH batteries
Power Management	Full power pathing. Internal batteries start working when external power is exhausted
Operation Voltage	DC 9-32V
Operation Temperature	-20ºC to +70ºC
Store Temperature	-30ºC to +85ºC
Operating Humidity	5% to 95%
Dimension	10888.532mm
Weight	320g

Product Packet:

Number	Configuration	Packet
1	GPS device	Yes
2	GPS antenna	Yes
3	GSM antenna	Yes
4	Communication antenna	Yes
5	Power line	Yes
6	ACC signal detecting line	Yes
7	SOS button	Yes
8	Internal battery	Yes
9	Empty/full load detecting line	Optional
10	Door open/lock detecting line	Optional
11	Microphone	Optional
12	Horn/ speaker	Optional
13	Relay for electricity or oil cutoff	Optional
14	Fuel sensor	Optional
15	Rotational sensor	Optional
16	Digital camera	Optional
17	LCD screen	Optional
18	IC card	Optional
19	LCD connection lines	Optional
20	Installation holders and velcro	Yes
21	Installation screws	Yes
22	User manual	Yes
23	Quality assurance card	Yes