Specifications

copper wire brass impeller
Suitable for home use
low noise ,high head and big flow
Easy to use

Features

These pumps with peripheral impeller are able to offer high pressure in relation to comparatively low powers and which have particularly steady operating curves.

For the correct functioning of the pump, use to pump clean water, or non-aggressive liquids only , without sand or other solid impurities.

 

Application  

Applied to pumping such liquid which is clean, no solid matter or frictional matter, low viscous, noncorrosive, non-crystallizable, chemically neutral and close to water. Such as:

 

1. Tank filling 

2. Domestic water supply 

3. Water transfer 

4. Pressure boosting 

5. Irrigation 

 

Construction 

PUMP

Pump Body: Cast Iron

Impeller: Brass

Mechanical Seal: Carbon / Ceramic / Stainless Steel 

MOTOR

Single Phase

Heavy Duty Continuous Work

Motor Housing: Aluminum / Steel-plate

Shaft: Carbon Steel / Stainless Steel

Insulation: Class B / Class F

Protection: IP44 / IP54

Cooling: External Ventilation

 

 

Installation

Pumps should be installed in a covered area, protected 
against the weather.

 

Operating limitations

Liquid temperature up to 60°C

Ambient temperature up to 40°C

Total suction lift up to 9m

Continuous duty 

Head:35m

Flow:35l/m