18km Solar Energy Fence Charger for Cow (Accept OEM Service)
Negotiable /Piece
Min.Order:200 Pieces
Ander Leisure Products Co., Ltd.
18km Solar Energy Fence Charger for Horse (Accept OEM Service)
18KM Solar Energy Fence Charger for Farm (Accept OEM Service)
New solar powered farm electric fence energizer 8km with CE (Accept OEM service)
18KM Solar power electric fence energiser Solar energy panels approved by CE (Accept OEM Service)
Solar Electric Fence Energiser 8km Solar fence generator CE Passed (Accept OEM service)
18km Solar Energy Fence Charger for Cow (Accept OEM service )
Battery | 6V 5Ah Lead Sealed |
Discharge Energy | 0.8-0.95 Joules |
Output Voltage | 8KV (+ -1.5kV) |
Fence Length | Up to 18+2km |
Solar Panel Size | 110 x 96mm |
Solar Panel Output | 1.3 W |
Charge Voltage | 7.5VDC |
Dimensions | 194 x 178 x 175mm |
Weight | 2.6kgs (including rechargeable battery) |
Single Line Rated | 18 km |
Double Line Rated | 9 km |
Certification | CE Approved |
It is ready to use straight out of the box; whether you want to keep your livestock or dogs contained, electrify a holding pen or erect an entire farm electric fencing system.
Next time you see your animals trying to escape, know that you have them completely contained with your Electric Fence Solar Energiser.
No need to waste time putting up stop-gap fencing.
Once the fence is erected the electric pulse will keep your animals in the paddock they belong in, giving you real peace of mind.
To top it off, the battery when fully charged from the solar panel will last up to 3 weeks without direct sunlight.
We have personally tested and proven that the solar energiser we sell have the ability to stand up to- all weather conditions that the Australia climate can throw at it.
Notice:
1) Use Solar powered Electric Fence Energizer in a dry place otherwise the battery loses its charge very quickly.
2) The diameter of the wire must be 2mm-3mm, if the wire wide than 2mm-3mm will increased the power consumption results the battery life short than 2 days.
3) The wires and the post must be insulated from touching each other otherwise the conductive post will cause some power loss.