LG862 Lonking brand new china wheel loader with construction loader tires
USD $1 - $40,000 /Unit
Min.Order:1 Unit
Shanghai Long Fen Machinery & Equipment Co., Ltd.
High quality Lonking 6 ton wheel loader for sale
Ovarall Size
NO. | DESCRIPTION | UNIT | DIMENSIONS |
A | Overall Height – Bucket Raised | mm | 5988 |
B | Bucket Pin Height at Max. Lift | mm | 4550 |
C | Dump Clearance at Max. Lift ( 45°) | mm | 3411 |
D | Reach at Max. Lift and 45° Dump | mm | 1206 |
E | Rack Back Angle at Carry | o | 49 |
F | Rack Back Angle at Ground | o | 44 |
G | Digging Depth | mm | 60 |
H | Rack Back Angle at Max. Lift | o | 54 |
I | Dump Angle at Max. Lift | o | 45 |
J | Carry Height | mm | 311 |
K | Ground Clearance | mm | 432 |
L | Center Line of Front Axle to Hitch | mm | 1700 |
M | Wheel Base | mm | 3400 |
N | Overall Length | mm | 8610 |
O | Departure Angle | o | 28 |
P | Height to Top of Cab | mm | 3430 |
Q | Overall Width over Bucket | mm | 3050 |
R | Min. Turning Radius over Bucket | mm | 7650 |
S | Min. Turning Radius over Tires | mm | 6797.5 |
T | Steering Angle – Left/Right | o | 35 |
U | Width at Tread Center | mm | 2270 |
V | Overall Width over Tires | mm | 2865 |
Overall Date and engine &electric system
OVERALL DATE | |||
Bucket capacity | 3.5-5.0m³ | ||
Rated payload | 6000kg | ||
Operating Weight | 20850±300kg | ||
Traction Force | 175±3kN | ||
Breakout Force | 200±3kN | ||
L×W×H | 8610×3050×3430mm | ||
ENGINE&ELECTRICAL SYSTEM | |||
lMaker/Mode | WEICHAI/WD10G240E11 | ||
Emission Standard | EPA (TierⅡ)/NationalⅡ | ||
Engine Type | 4 Stroke,Turbocharged,Water-cooled,Direct Injection,Diesel Engine | ||
Rated Power | 175kW(240hp)/2200rpm | ||
Maximum Torque | 920N·m/1300-1600rpm | ||
Bore x Stroke (mm) | 126×130 | ||
No. of Cylinders/Displacement | 6/9.726L | ||
Compression Ratio | 17 | ||
Air Cleaner | Three Stage Air Cleaner with Cyclone Pre-cleaner | ||
Alternator | 55Amp | ||
Battery | 2-24V/120Ah | ||
Starting Motor | 24V/7.5kW | ||
Heating Capacity (W) | 5000W | ||
Cooling Capacity (W) | 4700W |
Hydraulic System
HYDRAULIC SYSTEM | ||||||
Type | Single-lever(Joystick) Control | |||||
Pump | Gear Pump,275L/min·2200rpm | |||||
Control Valve | 2 Spool (Bucket&Boom) | |||||
System Pressure | 16MPa | |||||
Cylinder | Lift Cylinder | 2-180×864mm | ||||
No.-Bore x stroke | Tilt Cylinder | 1-220×626mm | ||||
Joystick Control Pressure | 2.5MPa | |||||
Cycle Time | Raise | Dump | Lower | Total | ||
(Sec) | 6.3 | 1.2 | 4.3 | 11.8 |
Drive Train
DRIVE TRAIN | |||||
Transmission Type | Countershaft Powershift Transmission | ||||
Shift Type | Electronic Powershift Control | ||||
Pressure of Transmission | 1.6-1.8MPa | ||||
Torque Converter Type | Single-stage,Single-turbine,3-element | ||||
Torque Ratio | 2.5 | ||||
Axles | Rigid Front Axle&Oscillating Rear Axle | ||||
Rear Axle Oscillation (°) | ±10° | ||||
Differential | Conventional | ||||
Main Reducer | Spiral Bevel,1-stage Reduction | ||||
Tire | 23.5-25 L-3 20PR TT | ||||
Travel Speeds | km/h | 1st | 2nd | 3rd | 4th |
Forward | 6.7 | 11.7 | 23.8 | 37.5 | |
Reverse | 6.7 | 11.7 | 23.8 |
PICTURES FOR LONKING 6 TON WHEEL LOAER
Packing and Shipping
Our Company