Specifications
1.Low noise, low vibration
2.A high degree of standardization of components, quality assurance.
3Sweden SKF bearing
1. The traditional water-cooled blower, only the local cooling gear, resulting in body temperature is too high, frequent use of the near future and have problems. The company designed the entire water-cooled blower, the host part is completely coated in the chamber within the cooling water, can be high temperature operation, safe and secure use of the high-voltage transmission and aeration of the occasion.
2. The company produces the blower chamber and the side cover flange and groove rim, in order to improve the operating intensity of the blast and to prevent the fastening phenomenon caused when the eccentric life of blower.
3. All the major water-cooled blower is set to host the body shell expanded outwards, in the shell and the outer cylinder main body relative to the conduction channel between the open water, so that outer ring within the cylinder by the fluid flow of water to achieve the cooling effect.