Specifications

IPEX cable assembly RF connectors with FEP cable like :
0.81mm, 1.13mm, 1.32mm, 1.37mm

IPEX Cable Assembly and RF connector with RF cable assembly, SMA connector with RG174, SMB connector with RG316, or RG178 with SMB connector end......

1.  ELECTRICAL

    

Frequency Range                    0-2.5GHz

Impedance                       50 Ω

Insertion Loss                          1.5dB Max

 

2.  GENERAL CHARACTERISTICS

    

Open/Short Test: 100%

Hi-pot Test 300V: 100%

Connector Pull Force: 1.5kgf

Sweep Test: 30 degree (left, right, front, back) 2 cycles.

Storage Temperature:             -40°C to +85°C

 

DES:

SMA JACK with Cable

RG178Cable 150mm

ECA-090X

 

Body	brass	Nickel or gold plated
insulator	PTFE
Contact	brass	Gold plated thickness >8u”

 

1.  ELECTRICAL

Impedance: 75W nominal

Frequency Range: 0~4GHz

Rating Voltage: 500V

Dielectric Withstanding Voltage: 1500V

Contact Resistance: 3.0 mW MAX

Insulation Resistance: 5000 MW MIN.

 

2.  GENERAL CHARACTERISTICS

 

Storage Temperature:           -40°C to 85°C

3.  RELIABILITY

 

DURABILITY:               >500 CYCLES

 

SALT SPRAY TEST:    APPEARANCE OK & CONTACT RESISTANCE 40mW max. (Exposed to salt mist conditions: concentration 5±1%, PH: 6.5-7.2, cycle is 13’s spray, 11’s stop, temp is 35±2°C, time: 8 hours.)

 

4. Rohs:

All the components of this connector are compliant with European directive 2002/95/CE”.

 

BNC connectors are characterized by their 2-stud quick connect/disconnect bayonet coupling arrangement.

They are one of the most popular of the coaxial connector and are suitable for a wide range of systems,including Radio Telecommunication systems,Medical Equipment,Computer Networks,Safety&Security and test instrumentation.Available in 50Ω,75Ω,and 50Ω reverse polarity.

Product Group

 

 

 

 

 

Factory View

 

 

 

 

Quality

• QC/Technical Support We possess digital calipers, digital micrometers, thread and pin gauges, tool microscopes, pitch diameter micrometers, height gauges, profile projectors, hardness testers, ohm testers and push/pull testers.

 

• Awards & Other Recognitions We are ISO 9001:2008 certified

Profile Each of our staff members possesses a college degree, and on average, they each have 4 years of experience.