Product name

aluminum slab 6061 T6 for automobile body

Alloy

Thickness(mm)

Width(mm)

Temper

A1050,A1060, A1070,A1100,A1235,A1245

0.2-3.0

20-2300

O,H12,H22,H14,H24,H16,H26,H18

4.0-12.0

1000-2300

H111,H112

A3003,A3004,A3105

0.2-3.0

20-2300

O,H12,H22,H14,H24,H16,H26,H18

4.0-12.0

1000-2300

H111,H112

A5052,A5083,A5754,A5005

0.2-3.0

20-2300

O,H12,H22,H14,H24,H16,H26,H18

4.0-12.0

1000-2300

H111,H112

A6061,A6082,A6063

0.8-3.0

20-2300

O

A8011,A1145,A1235

0.005-0.2

20-2300

O,,H18,H24

Quality of material: totally free from defects like white rust, oil patches, roll marks, edge damage,camber, dents, holes, break lines, scratches and free from coil set

Application : Mainly used insigns, billboards, building exterior decoration, bus body, high-rise buildings and factories wall decoration, kitchen sink, lamp, fan leaves, with pieces of electronic, chemical equipment, sheet metal processing parts,deep drawing or spinning hollowware, welding parts, heat exchangers, bell surface and disk, plate, kitchenware, decorations, reflective devices, ect

Product name

aluminum slab 6061 T6 for automobile body

Payment terms

Packaging details

(1).100% irrevocable L/C at sight (2).30% T/T in advance as deposit and the balance against the B/L copy and the commercial invoice (3).30% T/T in advance as deposit and the balance before picking up the goods or L/C at sight

(1)Stanard seaworthy export packing,wooden pallets with plastics protection for the coil and sheet; (2)15-20MT can be loaded into 20 foot container,we try to use 20 foot container,the sea freight rate is much cheaper than 40 foot container. (3) the other packing can be made based on the customer requirement. (4) the packing is very strong, which has 3 lays, thick fiber, foam, plastic.the bottom is wooden pallet.you can see the detail packing information as below.