Best technoligy atmospheric water generator for health water 88H
USD $450 - $950 /Piece
Min.Order:10 Pieces
Fujian Yuxin Electronic Equipment Co., Ltd.
Good performance- atmospheric water generator for home and hotel
Description:
1.11 stages filtration system
2.Ro membrane
3.Green and environment-friendly
4.Easy installatio
Model | HR-88H |
Voltage | A.C. 220V / 110V |
Frequency | 50Hz/60Hz |
Total Wattage | 1000-1150W |
Total Current | 4.6-4.8A |
Cooling Wattage | 500W |
Heating Wattage | 500W |
Cold Water T, | 4-10°C |
Hot Water T, | 75-93°C |
Refrigerant Type | R22 |
Extra USD20 for R407c/R134a | |
Production Capacity | 30L/Day(30’C, humidity 80%) |
Storage Capacity | 12.4L |
Temperature Range | 15’C-40’C |
Humidity Range | 35%-95% |
Noise Level | <60DB |
Size(cm) | 40*41.5*112.4 |
MOQ | 50pcs |
CTN Load Qty | 20ft: 129pcs |
40ft: 270pcs |
How Does It Work
How Atmospheric Water Generators work
1. Machine first pulls air through an electrostatic filter, removing 93% of all air born particles.
2. A condensation unit receives this clean humid airflow and condenses water vapor into liquid.
3. As the machine collects the water, it drops into a collection tray and immediately passes into Ultraviolet (UV) light, where the
water stays in contact with UV rays for approximately 30 minutes. This kills over 90% of all germs and bacteria in the water.
4. The water is then pumped through a sediment screen and then through 2 solid block activated carbon (SBAC) 1 micron filters, which removes over 90% of any volatile organic chemicals (VOCs) that may be in the water.
5. The water is then filtered through AWS's proprietary ultrafiltration (UF) membrane, with a pore size of .015 micron, to remove virtually all bacteria and common viruses.
6. The water is then pumped into a reservoir tank.
7. From the reservoir tank, the water is recycled every 30 minutes through the UV and back into the reservoir tank. The water is then chilled or heated and dispensed at the consumer's convenience.
Description:
Picture: