Intruder alarm system house safety alarm automatic fire alarm system

• GSM and telephone line dual connection
• Can program 5 phone numbers
• Support app function
• 
• Big LCD display and smart touch keypad.
• 30 wireless programmable zones and 4 wired programmable zones
• Smart zone function, can automatically check door and window status
• Remote control and remote monitoring via phone calls or SMS
• Arm and disarm via mobile devices
• Auto dialer or send SMS when alarm system is triggered
• Remote voice monitoring with built-in microphone
• Compatible with Contact ID
• Can work with CCTV system and IP camera, control your home appliances
• Built-in GSM antenna design
• Quad-band frequency
• Support multi-language
• Support 100 alarm event log and 100 operation event log
• Secure learning code technology

GSM+PSTN can auto switch to GSM alarm without telephone.

5 Groups alarm numbers,1 group center number,1 group SMS number

TFT Color Display

100 alarm information records. can check it freely.

SMS alert includes :arm/disarm, battery/sensors low-voltage,AC

Failure&recovery when phone line cut-off.

One group centre number.

Two way intercom

Two code: Pin code and operation code( user code)

Support weekly timely pre-set arm/disarm function.

Auto-alarm and disalarm

Temperature Control

The system carries with built-in temperature sensor for monitoring
onsite temperature. It allows user to set the upper limit and lower limit
to make temperature alert (relay output). It will send text message alert
when you enable SMS notification.

Relay output.

System default is NC signal transmit when alarm. If your setting is NC
signal transmit when temperature abnormal (out of the normal range,
extremely high or low), then the switch is NC output of temperature, or
else it is output of alarm.

Support arm delay

when you arm
(stay arm/ away arm) the system, it will enter arming status after the
preset delay time.

Support alarm dealy

when there is analarm, it will make call or send SMS after the preset delay time.

Emergency zone, Entry Delay zone,  Intelligent zone available!

Standard pack components

1 main panel

1remote controller

1 door sensor

1 WIFI antenna

1 power supply

1 manual

Technical Parameters
Power supply: AC=100-230V 50Hz/60Hz
Working Voltage: DC12V 1A
Standby Current: <35mA
Alarming Current: <120mA
Backup Battery: 3.7V 800mA
Standby Time: Around 24 hours
Charging Time: 8 hours
GSM Band: 850/900/1800/1900MHz
GSM Transmission Power: 2W
Wireless Frequency: 433/868MHz (Default: 433MHz)
Wireless Transmission Distance: ≤100m (open area)
Working Temperature: 10°C~+40°C
Humidity: ≤90% ( no fog)

Where to apply?

Contact us:

We will respond to all email enquiries within 24 hours but usually much sooner.

If no response for you within 48 hours , please check the spam in your mail box.

If you have any questions or queries on any aspect of our service please do not hesitate to contact us.

 My Skype: hhnicholeyang.

Your order will be shipped within 1-2 business days From China once we receive your payment.