Specifications

High gain;Aluminum alloy framework;Full day working;Optimized dimension;Vertical or Horizontal Mounting way;Factory Price.

230MHz 10dBi Directional Yagi Antenna wireless outdoor antenna Specifications:

Feature:

High gain;

Extruded anodized Aluminum Alloy framework;

Full day working;

Optimized dimension;

Vertical or horizontal mounting way.

Application:

230MHz WLAN system, fixed wireless voice and data applications;

M2M communications (ATMs, financial data processing, telemetry etc);

Point-to-point, point-to-multipoint system, extending wireless data to weak signal areas (can extend connectivity range by factor of 3 or more);

Wireless bridging, client termination antenna,  enables rural and remote wireless service provision.

 

AMXW-230-10 Electrical Specifications
Frequency range(MHz)	230±10
Bandwidth(MHz)	20
Gain(dBi)	10
Element	6
Half-power beam width(°)	H:42 V:38
Front-to-back ratio(dB)	≥16
VSWR	≤1.5
Input Impedance(Ω)	50
Polarization	Horizontal or Vertical
Maximum input power(W)	100
Lightning protection	DC Ground
Input connector type	N female or others
Mechanical Specifications
Dimensions(mm)	1440*680*80
Cable length(m)	0.3
Antenna weight(kg)	0.55
Operating temperature(°c)	-40~60
Rated Wind Velocity(m/s)	60
Clamp	U-shape
Mounting hardware(mm)	Φ35~Φ50

Antenna Installation Instructions:

Please follow these steps: mount the antenna onto the pole, and adjust the inclination of the antenna to the proper position, then fasten the screw to the screw nut. The final structure is just like the picture above.

1. There should be at least three meters between the ground or floor and the antenna above. No huge building,big metal object or any other obstacle or shelter nearby.

2. Put the clamp plate,the flat washer,the spring washer and screw nuts successively on the holes on the antenna, then place the short screw bolt through the holes to fasten the clamp plate to the antenna. Twist the nuts tightly.

3. Place the M6 U-shape screw through the pole whose outer diameter is 35 ~ 50mm and the clamp plate. Then put on the screw nuts and twist them.

4. Adjust the inclination of the antenna to the proper position to receive the best signal by switching the holes on the clamp plate. Then seal all the connections and twist all the nuts tightly.

This high gain wideband directional antenna covers all international cellular, mobile and wireless data bands including GSM 900/GSM1800/UMTS/LTE bands as well as extended cellular and WiMAX bands such as European/USA “Digital Dividend bands” and 2.3-2.7GHz licensed and unlicensed data bands. Its configuration is suitable for various wireless communications systems.

Ameison Factory Infos:

Established in 2009 Ameison manufactures a wide variety of OEM and ODM antennas including: LTE, WIMAX, Wi-Fi, 3G, DECT, WLAN, CDMA, GPRS,CMMB, DMB, GSM and DVB-T tyes etc.(our products arrange cover the frequency from 88 MHz to 5.8 GHz.)