Specifications

Sandwich Panel Machine with good quality

1. Technical Parameters

Sandwich panel specification
1	length	cutting length≥2 m
2	width	(see profile drawing)
3	thickness	(see profile drawing)
raw material specification
1	coil thickness	0.4~0.6 mm (steel be flat without ups and downs,deformation and bending)
2	coil stress	≤235MPa
3	coil max width	1200 mm (tolerance±2mm)
4	coil max weight	5t
5	coil ID	500 and 600 mm
6	coil OD	1000 mm
7	EPS material	density is≥18kg/m3,unstraight of each side ≤mm/m,,curve ≤mm/m,surface be even,ineveness smaller than 1.mm/m,EPS material single piece length more than ≥3m.
8	Rockwool material	length more than 100mm,vertical lined,density ≥100kg/m3 ,single piece length more than ≥3m
9	Material suitable shape	see profile drawing.(prepared by customer and according to the )
10	Material suitable width	minimum shall be 1/2mm of the finished panel width.
Machine line specification
1	Work line speed	1000-3000mm/min (frequency speed adjustment).attention:depend on glue brand, temperature and proficiency of operators.
2	Machine length	about 40 m
3	Working height	1050 mm(panel output height)
4	Laminating effective length	7.5 m
5	Control way	adopt industrial computer PLC
6	Total power	about 40 kw
7	power	380V/3phase/50 Hz
8	control voltage	24 V/110 V/220 V
9	pneumatic	0.7 Mpa (self prepared by factory)
10	best working temperature	around 25°C

...