Full Automatic Injection Molding Machine For Plastic Products
Consist of plasticizing system, injection system, the clamping system and transmission system of
plastic injection molding equipment.
Our company use die casting technologies applied to injection molding machines for many years.
In mechanical, hydraulic, electric control, etc for comprehensive improvement, perfect combination
of dynamic pressure casting and speed.
Advantage:
1. Clamping Unit
Reliable 5-pint twin-toggle locking mechanism; Platens are designed under Finite Element Analysis;
High speed clamping is stable while low pressure protection is accurate; Automatic lubrication system;
Oil shortage alarm; Ejector stroke precisely controlled by transducer; Plenty of ejector modes for you
to choose.
2. Injection Unit
Double-cylinder balance injection system; Shot weight is precisely controlled by transducer;
Using hydraulic motor to carry out variable speed.
3. Hydraulic Unit
Domestic high-tech divided hydraulic system; Hydraulic safety device; Imported high quality
hydraulic components are applied.
4. Electric Unit
Special controller for plastic injection molding machine; All the main components are imported from
famous company, for example: TE(France), Gefran(Italy),etc.
Technical Specification
ITEM | UNIT | DATA | |||
Injection | Screw Diameter | mm | 40 | 45 | 48 |
| Screw L/D Ratio | L/D | 22.5 | 20.3 | 19 |
| Injection Volume | cm3 | 251 | 318 | 362 |
| Shot Weight | g | 229 | 289 | 329 |
| Injection Pressure | Mpa | 202 | 159 | 140 |
Clamping | Clamping Force | KN | 1680 | ||
| Opening Stroke | mm | 420 | ||
| Mould Thickness(Min-Max) | mm | 180-500 | ||
| Space Between Tie-Bars | mm | 455×455 | ||
| Ejector Force | KN | 45 | ||
| Ejector Stroke | mm | 140 | ||
General | Motor Power | KW | 15 | ||
| Heater | KW | 10 | ||
| Pump Pressure | Mpa | 16 | ||
| Machine Dimension | m | 5.2×1.3×2.1 | ||
| Machine Weight | T | 4.8 | ||
| Mould Orientation Ring Diameter | mm | Φ125 | ||
| Nozzle Radius | mm | SR15 | ||
Accessory list:
Components | Brand/Country |
Hydraulic motor | Intermot or Cazoni/USA |
Hydraulic pump | Tokimec /Japan or Vickers /U.S.A |
Directional valve | Vickers /U.S.A |
Proportional valve | Yuken /Taiwan |
Orbit hydraulic motor | EATON /U.S.A |
Seal and "o" ring | Valqua /Japan |
Hydraulic hose | LAFAGOMMA /Italy or AWROQUIP /U.S.A |
Pressure meter | VDO /Germany |
Contactor | Schneider /France |
Fuse holder or phase breaker | Schneider /France |
Limit switch | Omron /Japan or Telemecanique /France |
Air breaker | Schneider /France or Fuji /Japan |
Position Transducer | Gefran /Italy |
Sensor | Omron /Japan |
Computer | Techmation /Taiwan (PC based,color LCD) |
Clamping Platen | QT450 /China (precise casting) |
Tie bar | Cr40(after special heat treatment)/China |
Screw and Barrel | 38CrMoALA /China |
Remark: components changed due to technology and supplier without pre-notice | |
In the beginning of the sales, we will have professional sales engineers communicate with you,
confirming your detail require, then choose the most suitable machine for your reference. We accept
custom-tailored for your specific needs.
If the equipment failure caused by quality problem. We provide a year free warranty from the day
equipment arrived at your place .
If the equipment failure caused by non quality reason. We also can guaranteed provide actively
cooperation, repair and maintain the machine.
Life time guarantee supply spare parts, truly worry-free purchase.
If you have any questions, contact us. We will try our best to serve you.
Full Automatic Injection Molding Machine For Plastic Products Full Automatic Injection Molding Machine For Plastic Products