(Zero-based calibrated ranges, reference conditions, silicone oil fill, 316L SST isolating diaphragms and 4 to 20mA analog output in linear mode.)

Range, Sensor Limits and Static Pressure

Accuracy

For range code 2, 3: ±0.2% of span

For range code 4~8:

For spans not greater than 10:1 of URL: ±0.1% of span

For spans greater than 10:1 of URL: ± [0.1+ 0.1 × (URL / span -10)] % of span

Stability

For range code 2, 3: ±0.2% of URL for 12 months

For range code 4~8: ±0.1% of URL for 12 months

Span Turn-down Capacity

For range code 2: Up to 5:1

For range code 3: Up to 10:1

For range code 4~8: Up to 40:1, less than 10:1 is recommended.

Temperature Effect

For range code 2, 3: ±0.3%URL/10℃

For range code 4~8:

For spans not greater than 10:1 of URL: ±0.1%URL/10℃

For spans greater than 10:1 of URL: ±0.2%URL/10℃

Static Pressure Effect

For range code 2: ±0.5% of URL/7MPa

For range code 3: ±0.5% of URL/14MPa

For range code 4~8: ±0.25% of URL/14MPa

Wetted Materials

Isolating diaphragms:

316L SST, Hastelloy C

Drain/Vent valves:

316 SST

Process flanges and adapters:

316 SST

Wetted o-rings:

Nitrile rubber

Non-wetted Materials

Fill fluid:

Silicone oil, Fluorinated oil

Nuts and bolts:

Stainless steel

Electronics housing:

Low-copper aluminum

Cover o-rings:

Nitrile rubber

Process Connections

Flanged process connection: ¼-18NPT

Weight

About 3.5kg (Excluding options)

Connector (Optional)

Oval flange:

½-14 NPT female thread oval flange

T-shaped adapter:

M20×1.5 T-shaped male thread connecting block with ø14 induced pressure tube welded behind

Mounting bracket: Bend Bracket, Pipe Mounted (2 in.), Flat Bracket, Pipe Mounted (2 in.)