Introduction

This method is used for determining the ductility of bituminous materials by measuring the elongation before breaking when two ends of a briquette specimen are pulled apart at a speed of 50mm/min + 2.5mm/min at temperature of 270C + 0.50C.

General Descripation & Specifications

The Machine consist of the following :

• Stainless steel bath
• Temperature controller (Thermostatic/Digital)
• Immersion electric heater
• Constant speed Pump cum stirrer
• Carriage holding up to three standard briquette moulds
• Electric motor with gear mechanism
• Stainless steel scale and pointer
• Control Panel

Specifications
The apparatus consists of water bath with a thermostatic heater and a circulating pump to maintain uniform water temperature. One half of the briquette moulds is fixed in a fixed plate in the water bath, the other half of the briquette mould is fixed to a carrier which slides over a rotating threaded shaft with a clutch. The motor and gears to rotate the shaft are housed in a cabinet fixed above the other end of the both. A pointer fixed to the carrier moves over. a scale graduated from 0-110 cm x 1mm fixed on the bath with "0" (Zero) of the scale towards the fixed plates side. The rotating shaft has 2 speeds of travel for the bracket, 5 cm/min. and 1cm/min. selected by a clutch. Water bath inside is of Stainless steel with insulation and a water drain. A heater with thermostatic control is fitted. inside the water bath. Control switches for motor, stirrer, heater and indicator lamps are fitted to a control panel located at a convenient place on the water bath. Complete with three briquette moulds and one base plate. Working on 230 Volts, single phase, 50 cycles, AC.

Optional Accessories (At extra cost)

• Digital Temperature indicator cum controller (in place of Thermostatic control)
• Digital display for Elongation
• The more advanced model with refrigeration system which ensures better temperature control in tropical conditions. The Machine is mounted on a steel stand with refrigeration unit at its base.
• Base Plate for mould.
• Mould for elastic recovery

Its late founder Mr. Vimal C. Parikh sowed the seed of presently known EIE Instruments way back in 1977. The seed has now grown to a large tree, which gives shelter and meaning of life to Hundreds of people associated with it. The present directors, staff members and all concerned will remain permanently indebted to him for this courage, support and guiding principles.

We started modestly as a marketing organization and later entered the ever-challenging field of manufacturing. The rich, hard-earned experience as a marketing organization and close interaction with the end users, paved the way for a customer driven, customer focused and customer oriented company.

EIE Instruments is a part of Tech-Mech group. The Group has interest in manufacturing, marketing and Calibration of Scientific Instruments and Testing Equipments for various applications. Professional marketing set up, strong commitment to after sales support, over 30 years experience in understanding and meeting our customer's requirements and sustained emphasis on customer satisfaction, has build a loyal base of customers in different segments of industry, Research and Education field through out the country.

At EIE, we always think and view any point, from the customers` point of view. Be it, Quality of goods, delivery schedules or after sales service support, we always think of customers delight and satisfaction. To ensure this, we have implemented ISO standards at all levels of organization and are strictly governed by it. We are accredited with ISO 9001 certification for our manufacturing, marketing and Calibration activities. However, this is just beginning. We have lot more to offer.
 

Quality is preeminent to us and we, at EIE Instruments, follow TQM (total quality management) to ensure that our products exhibit complete durability and dependability. Customization and prompt delivery is our eminence (strength). Our innovative spirit enables us to stay a step ahead of our competitors by providing the widest range of products.

We persistently follow nationally and internationally recognized quality standards and technical specifications. At our quality department, we have all the requisite tools, equipments, and technologies to help us ascertain the quality of our products. We take utmost care and ensure that our production process right from checking of raw materials to final shipment of our consignments confirm to industrial standards and norms.

We are constantly working on new concepts to indulge into the ever changing trends and needs of industries spread worldwide. The excellent performance and accuracy of our range is assured through an optimized quality mechanism that controls, checks and improves products. Moreover, our expertise in this domain has made us the prominent and the only choice of our clients. The technical services related laboratory is equipped with the most advanced testing facilities and manned by a team of experts to ensure that the customers do not face any trouble at the time of delivery of products.

» To provide user friendly, simplified, technologically advanced, reliable & robust instrumentation/automation to global customers backed by efficient services
» Applying creative innovations and modern techniques to uplift the standard of quality as to satisfy customers' need of achieving high precision & accuracy in measurement and testing
» Further, to create an enviorment to nurture and promote innovations and core values amongst the employees so as to leave no stone unturned in fulfilling the expectations of customers.
» To deliever reliability & credibility

» EIE Instruments envisages itself as an emerging organisation standing ahead of the competition through its marketing and manufacturing of the advanced laboratory equipments.
» EIE Instruments evolves itself as a workplace of efficient individuals dedicated to serve the nation & Indian industry with constant improvement driven by innovation, integrity & inspiration.