YS-1 Plastic Flat Film Extruding and Stretching Line
USD $10,000 - $20,000 /Set
Min.Order:1 Set
Jiangyin Shuncheng Air Treatment Equipment Co., Ltd.
Maximum linear speed of winding: 280m/minute
Maximum diameter of winding cylinder: 160mm
Size for winding pipe:
38 (inner) x 41 (outer) x 230 (L)mm
38 (inner) x 41 (outer) x 270 (L)mm
Plastic extruding flat film stretching line SPL-65-700
This machine unit achieved the aim of China-made through absorbing the foreign advanced technology.The mainframe adopted new-type high-effective extruder.The mantle bolt adopt 38CrMoA1A which was treated by nitriding of the surface of the material with higher corrosion resistance and wearing strength.
All the driving motors of this machine are adopted electromagnetic governor motors which are flexible and convenient in adjustment and can perform the infinitive stage transmission by controller.
The oven can be provided two types according to the requirements of the clients:
1. the traditional curved oven,it is cheaper.
2. the pulling & extending oven with up & down circulating warm wind which is close to the international technical level in 1990s.This unit has the merit of high output,low energy consumption,compact structure,good quality,steady running,easy operation,good-looking outline,safe and reliable,etc.
Main technical parameters: Parameters Model Model Model Parameters SPL-65-700 SPL-90-1100 Extruding Bolt 65mm/32:1 90mm/33:1 Die Width 700mm 1100mm Flat Thread Thickness 0.03-0.15mm 0.03-0.15mm Flat Thread Density 68-220 tex 84-200 tex Thread Delivering Speed 40-180m/min 100-200m/min Max.Production Capacity 75kg/h 100-200kg/h Total Installed Power 98KW 200KW Contour Size(L×W×H) 11.1×2.1×2.2m 19×5.5×3m ( Reject Thread Collecting box: 19×5.5×3m )