Product Details

Specifications

10L three layer borosilicate jacketed glass reactor
borosilicate 3.3
50-500rpm
PTFE stirring paddle
teflon sealing

10L Three Layer 3.3 High Borosilicate Glass Explosion Reactor GR-10L EX

I. Introduction of glass reaction kettle:

Reagents are set in the inner layer of double-layer glass reaction kettle, at the same time, vacuum can be taken out and mixing speed be adjusted. Interlayer can lead in refrigerating fluid, water and high temperature liquid to heat and cool the materials. It can be used in the experiment, middle-scale test, and production of chemistry, fine chemical engineering, biological pharmacy and synthesis of new materials. The products can be made into system devices with multi-purpose circulating water vacuum pump, diaphragm vacuum pump, low temperature circulating pump(vacuum), circulating cooler, constant temperature circulator, low temperature cooling liquid circulating pump and closed cooling and heating circulating equipment.

II. CHARACTERISTICS OF USES:

1. High borosilicate glass has good physical and chemical properties.

2. Can be used in wide temperature range from high temperature (300°C)to low temperature(-80°C).

3. Can work in constant pressure and vacuum, vacuum degree is below 0.095MPa in quiet situation.

4. Digital display of mixing speed, , frequency conversion, and constant speed mixing system, work steadily.

5. The sealing method and materials between mixer shaft ,PTFE mixing propeller (paddle),and ketttle cover are Know how of our company.

6. Corrosion resistant discharge valve is without dead space design.

7. The cooling or heating solution in the interlayer can be completely removed after reaction.

8. The whole structure is novelty, practical and beautiful.

III. Technical data:

Product		10L Three-layer Explosion-proof Glass Reactor
Model		GR-10L EX
Effective volume inside glass reactor (L)		10
Jacket capacity(L)		3
Heat transfer area of jacket(m²)		0.22
Heat transfer area of condenser(m²)		0.2
Material of glass reactor		High borosilicate glass 3.3
Material of fixed frame and connecting parts		Stainless steel 304
temperature range of kettle(°C)		-80~200
Operating pressure(Mpa)		Vacuum or constant pressure
Explosion-proof motor	Power(W)	180
	Adjusting mode	Variable frequency speed control
	Rotary speed (rpm)	50~500
Seven opening of the cover of glass reactor	Mixing open mouth	¢50mm Flange opening
	Opening of temperature sensor	24#standard ground joint
	Connecting opening of condenser	50# standard ball joint
	Liquid-adding opening	34# standard ground joint
	Ventage opening	24# standard ground joint
	Constant pressure funnel connecting opening	34# standard ground joint
	Solid-adding opening	¢80mm Flange opening
Liquid-circulating inlet and outlet of kettle		DN15
Material of sealing parts		PTFE
Power supply		220V 50HZ Explosion-proof
Discharge valve		Open-type discharge, PTFE material, effective distance from discharge valve to ground: over 400mm
Material of temperature sensor		Stainless steel with fluorine outside, double anti-corrosion
stirring		Rotary vane agitator, stainless steel axis with PTFE outside
Volume of constant pressure funnel(L)		1
Material-adding opening size of vacuum (mm)		External diameter:¢13.5mm; Internal diameter:¢8mm
Dimension(mm)		625L×405W×1790H

IV. ISO 9001:2008 Certificate

V. Recommended complete sets:

spray paint teflon circulating water jet aspirator SHB-B95T + 3.3 borosilicate glass reactor + hermetic refrigerated and heating circulator ZT series

common circulating water jet aspirator SHB-B95/ SHB-B95A + 3.3 borosilicate glass reactor + hermetic refrigerated and heating circulator ZT series

spray paint teflon circulating water jet aspirator SHB-B95T + 3.3 borosilicate glass reactor + circulating oil bath SY-X2 series

common circulating water jet aspirator SHB-B95/ SHB-95A + 3.3 borosilicate glass reactor + circulating oil bath SY-X2 series

VI. Detail drawing:

VII. Latest News:

VIII. Fairs:

IX. Welcome to our factory:

Package: