Specifications

Great Wall vacuum pump suppliers ISO certificate
1.stainless steel(ANSI)
2.taps No.3
3.adjuste vacuum
4.vacuum0.098MPa

Great Wall vacuum pump suppliers ISO certificate 

 

I. CHARACTERISTICS OF USES:

                 

       ♦The improved version of SHB-B type.

       ♦Three taps, can be used alone or in parallel.

       ♦Two taps are furnished with vacuum breaker, which can adjust the vacuum degree; there are two vacuum gauges visually displaying respectively.

       ♦A tap does not adjust, the vacuum degree of which is higher than (or equal to) the meter reading of the highest vacuum degree.

       ♦The casing adopts stainless steel material (ANSI standard), the rest is the same as SHB-B.

 

II. Technical data:

Model	Power(W)	Powersupply V/Hz	Flow L/min	Lift(m)	Safety functions	MaterialsOfMachine Casing	Maximum VacuumDegree (MPa)	Single Tap Air Sucking Amount L/min	Number of Taps (A)	Number of Taps (L)	Materials of Water Tank	Dimensions(mm)	Weight kg
SHB-B	550	220/50	100	12	Check valve	Staticelectricitysprey	0.098	10	3	57	Polyvinyl chloride	450L×350W×820H	36
SHB-B95									5	57		450L×350W×820H	36
SHB-B95A						1Cr18Ni9Ti			5	57		450L×350W×820H	36
SHB-B88	180		80	10					3	40		350L×280W×880H	26