Specifications

Cold trap can be used as pre-freeze tank and low-temperature trough. Equipped with drain valve for easy drainage.

I : CHARACTERISTICS OF USES

 

Capture water vapor and harmful gases emitted from vacuum drying oven or decompression concentration plant. Improve the service efficiency of the vacuum system, substantially , reduce the amount of steam inhalation of vacuum pump and extend the service life of the vacuum pump.

     The showing of cold trap temperature is useful for controlling the opening time of the vacuum pump  and preventing piping of water being pumped into the pump.

    The showing of cold trap temperature is useful for controlling the opening time of the vacuum pump  and preventing piping of water being pumped into the pump.

    It can be used as pre-freeze tank and low-temperature trough.

    Equipped with drain valve for easy drainage.

 

Precooling Rotary instrument

Slewing arrangement of flask for pre-cooling. When rotating, the solution is condensed into filmily on the wall, which can shorten the drying time.

   Rotary speed: 30~180 rpm

   Available equipment models: all low-temperature cooling liquid circulating pumps

 

II : Technical data

Model	CT-2000H	CT-2000L	CT-5000H	CT-5000L
Cold trap mode	Cooling directly dependent on barrel		Cavity cooling (glass condenser: matching,Direct freezing trap)
Dehumidification volume	Max.1kg(Water)		Max.4kg(Water)
Min. Temperature	-40°C	-80°C	-40°C	-80°C
Temperature digital	Digital display
Bath materials	Stainless Steel   ANSI 304
Interior size(mm)	200×200		250×250
Ambient temperature (°C)	5~25
Power Supply(V/Hz)	220/50

 

III: Logo and Certificate of our Company

 

 

 

IV: Pictures of CT-5000L Cold trap

 

 

 

 

V: Operation Principle of CT-5000L Cold trap