HOT SALE, Good Price, Green MASTERBATCH, High covering, disperse evenly, Strong tinting strength
USD $800 - $2,000 /Ton
Min.Order:10 Tons
Wudi Pengfei Plastic Masterbatch Co., Ltd.
Color masterbatch Munufacturer yellow red green grey golden blue ,we can accept all request color
Natural color, shinny blue MASTERBATCH, High covering, disperse evenly, BEST Price
Turquoise MASTERBATCH, High covering, disperse evenly, Manufacturer sales, Reasonable Price
Color MASTERBATCH, High covering, disperse evenly, Manufacturer sales,affordable Price
Turquoise MASTERBATCH, High covering, disperse evenly, Manufacturer sales, Reasonable Price
Colour masterbatches with high pigment content offer excellent dispersion, high thermal strength, superior fastness to light and gloss.
Products with varying pigment contents can also be customized, based on customer demands.
Physical Properties:
esistance Temperature | 280°C=536 °F |
Granule Appearance Diameter | 2.5mm-2.8mm |
Melting Point | 110 °C=230 °F |
Addition Rate | 2-4% |
ROHS Index | Environmental |
Range of application:
Blow molding, injection molding, wiredrawing, extrusion molding
1, Professional Manufacturer of PE/PP masterbatch since 1990
2,professional R&D ( Research and development) TEAM
3,advanced Testing equipment
4, Free samples and quick door to door service.
5,quality is our culture, reasonable price( competitive price)
6, Customized products promptly, Small qty can be accepted
Our Facility
Packaging:
Paper-plastic compound pocket, 25kg net weight of each..
Method of Usage:
l Step 1: Confirm the percentage of appending proportion.
For example: If using for film blowing with PE material, the required percentage is 4%.
*The normal proportion is 2% - 4%. But it is not fixed. It depends on the buyer’s requirement.
l Step2: Mix the material and the masterbatch together by the blender mixer according to the appending proportion. If no blender mixer, it can be manual mixed.
For example: Put 100kg PE material and 4kg PE masterbatch into the blender mixer.
*NOTED: The carrier of masterbatch must be the same with the material.
l Step 3: Continue the film blowing process as normal.
Suggested Ratio Dosage:0.2-0.4%