Specifications
Voltage: 12V DC
Flow capacity: 750 Gallons per hour
Hose Outlet: 19mm (3/4")
Approvals: CE
1. The SEAFLO submersible auto bilge pumps are equipped with built in electronic controlled reed sensor system to make fully automatic operation easy.
2. No separate float switch is needed and relay loop design protect the pump against instant high current.
3. No power use until pump turns on when water rises.
4. Auto Bilge Pumps are built with compact, efficient, long life motor, rust, ignition and corrosion protected stainless steel shaft, and high-impact durable plastic housing.
5.Quick release strainer for easy maintenance.
Product Description
- This product is 100% brand new, and comes packed in original Seaflo™ box
- Compact, automatic, fully submersible electric pump
- Built-in float switch! (No separate float switch is needed)
- Equipped with built in electronic controlled reed sensor system for easy fully automatic operation
- No power use until pump is activated by internal float switch (when water level rises)
- Compact, efficient, long life motor
- Rustproof and corrosion resistant
- Stainless steel shaft
- High-impact durable plastic housing
- Quick release strainer for easy maintenance
- Extremely efficient, very low current draw and offer high capacity output
- Water cooled long-life motors
- Ignition protection to protect the pump against high current
- Water/moisture tight seals
- Silent and vibrationless operation
- Anti-air lock protection
- Will not burn out when run dry
- Integrated float switch TEST button at rear of unit
- Can be used with switch panel for manual override
- Includes comprehensive user manual with installation instructions and wiring diagram
Specifications
- Voltage: 12V DC
- Flow capacity: 750 Gallons per hour (2850 Litres per hour) - 47.5 Litres per minute
- Max. delivery head: 3.8 metres (height of vertical water flow up pipe)
- Current draw: Only 3 Amp
- Hose Outlet: 19mm (3/4")
- Dimensions: Length 145mm (5.71") x Width 83mm (3.27") x 103mm (4.05")
- 3-wire lead, approx. 1m long
- Approvals: CE
Applications
- Typically used in boat hulls / bilges
- Bait tanks
- Ponds, pools, spas
- Other applications where you have to remove water from
- Note: These pumps are designed for intermittent use only, NOT designed for continuous use