Teflon Lining Horizontal Centrifugal End Suction Pump
USD $760 - $3,000 /Set
Min.Order:1 Set
Shanghai Shuangbao Machinery Co., Ltd.
FZB is our factory's independent research and development of patented products, which is a single stage, double volute type teflon lined self-priming pump.
Design Features
Corrosion and pressure resistance: wetted parts are made of corrosion resistant fluoroplastic, with these advantages, FZB pumps available to high corrosive applications.
Easy for operating: Developed for low sump application, pump installaed above the sump or tank, which easy for operating, maintenance and repair.
Standard
Characteristic analysis
0.1 Impeller Patent advantage
Patent no. | The name of the patent | The patent type | Available Date |
ZL200820038727.9 | new type self-priming pump | The patent for utility model | 08/Aug./2008-07/Aug./2018 |
0.2 Material advantage
PTFE, FEP, PFA are qualified large manufacture production, safe and secure plastic , has good stability, safety and environmental protection. Please ease of use
Model definition
Model and parameter
Item | Model | Flow | Head | Efficiency | NPSHa | Inlet x outlet (mm) | Self-priming height ( m) | Self-priming time | Speed
| Power | Pump and motor weight |
1 | 25FZB-20L | 1.5 | 19 | 10 | 3.00 | 25x25 | 1 | 180 | 2900 | 2.2 | 65 |
*3.6 | 18 | 20 | |||||||||
6 | 16 | 30 | |||||||||
*8 | 20 | 42 | |||||||||
12 | 17 | 40 | |||||||||
2 | 40FZB-30L | 5 | 32 | 24 | 3.50 | 40x50 | 3 | 150 | 2900 | 4 | 47 |
*8 | 30 | 48 | |||||||||
12 | 28 | 45 | |||||||||
*12 | 20 | 42 | |||||||||
15 | 17 | 40 | |||||||||
3 | 50FZB-30L | 8 | 32 | 24 | 3.50 | 50x50 | 3 | 150 | 2900 | 4 | 47 |
*12 | 30 | 48 | |||||||||
15 | 28 | 45 | |||||||||
4 | 50FZB-45L | 8 | 47 | 24 | 3.50 | 50x32 | 3 | 150 | 2900 | 7.5 | 160 |
*12 | 45 | 35 | |||||||||
15 | 43 | 32 | |||||||||
5 | 50FZB-70L | 8 | 72 | 20 | 4.00 | 50x32 | 3 | 150 | 2900 | 15 | 310 |
*12 | 70 | 26 | |||||||||
25 | 65 | 39 | |||||||||
6 | 60FZB-30L | 15 | 32 | 40 | 4.00 | 65x50 | 3 | 200 | 2900 | 7.5 | 320 |
*25 | 30 | 55 | |||||||||
35 | 27 | 48 | |||||||||
7 | 65FZB-45L | 15 | 47 | 30 | 4.00 | 65x40 | 3 | 180 | 2900 | 11 | 210 |
*25 | 45 | 42 | |||||||||
35 | 38 | 44 | |||||||||
8 | 65FZB-70L | 15 | 72 | 30 | 4.00 | 65x40 | 3 | 180 | 2900 | 30 | 300 |
*25 | 70 | 41 | |||||||||
35 | 65 | 42 | |||||||||
9 | 80FZB-30L | 35 | 32 | 54 | 4.50 | 80x65 | 3 | 150 | 2900 | 11 | 530 |
*50 | 30 | 58 | |||||||||
60 | 25 | 48 | |||||||||
10 | 80FZB-45L | 35 | 47 | 45 | 4.50 | 80x65 | 3 | 180 | 2900 | 15 | 284 |
*50 | 45 | 53 | |||||||||
60 | 42 | 46 | |||||||||
11 | 80FZB-70L | 35 | 72 | 45 | 5.00 | 80x50 | 3 | 200 | 2900 | 30 | 330 |
*50 | 70 | 50 | |||||||||
60 | 65 | 43 | |||||||||
12 | 100FZB-30L | 65 | 32 | 54 | 6.00 | 100x80 | 3 | 150 | 2900 | 18.5 | 390 |
*100 | 30 | 60 | |||||||||
110 | 26 | 54 | |||||||||
13 | 100FZB-45L | 65 | 46 | 48 | 6.00 | 100x80 | 3 | 150 | 2900 | 30 | 500 |
*100 | 45 | 55 | |||||||||
110 | 40 | 48 |
Remark:
-item marked with”*”for standard parameter
-Please choose similar or same parameter pump, if the parameter is not in the range of this table, we could improve it according to on site application.
- If flow rate is too small, the outlets add backflow connection.
- Motor phase: 2 phase
- If liquid specific gravity is more than 1.3g/cm3, the motor power should be added.
- If liquid with HF acid or some other type special liquid, spare parts material will be changed according to liquid.
Sectional drawing
Material form
Item | Designation | Material |
1 | Frount cover | Cast iron HT200 lined FEP |
2 | Discharge flange | Cast iron HT200 lined FEP |
3 | Pump casing | Cast iron HT200 lined FEP |
4 | Impeller | FEP and PTFE |
5 | Pump cover | Cast iron HT200 lined FEP |
6 | Mecahncial seal | SIC/TC |
Factory Basic Information:
Advantages
1. Research & Development: SBMC factory have a total of 20 engineer research and development team, which gives it distinct advantages in terms of product and technology upgrading.
2. Law Material Purchase:
3. Quality : ISO9001 Quality Management System
Since from 1985, focus on magnetic drive pump and Teflon lined process pump manufacturing .
Strictly Compliant with ISO9001 standard
Yes, our pump compliant with ISO / ASME/ANSI standard.
How can I purchase order without seeing the quality first?If it is a big order, we can provide a sample for running testing at your plant. And you can see the below our customers photos and more project reference list on.
How do you control the quality of the products?Our production is strictly according to ISO 9001 standard and factory was established in 1985, have 30 years experience in Teflon lined chemical process pumps, valves, piping and fittings.
How to customize pumps and mechanical seals ?Customers could send us application data, we will select suitable pump and seal types, or client could send us drawings, We are well in OEM and ODM.
How can I pay for my items? What is the payment you can provide?Usually by T/T, 30% down payment once PI confirmed, the balance will be paid after inspection and before shipment.
L/C at sight
1 year for main construction warranty.
How long is production lead time?Normally 25 days. If client need urgently, we have a huge spare parts stock, we could finish assembly and testing in 7-15 days.
What is the shipping terms you can provide ?Depnends on customer's requirements, we can provide different transportantin terms, such as EXW, FOB, CIF.
Who is in charge of after-sales?Inside sales. It can save customer's time and high efficiency communicate. Shuangbao has professional after sales service team, we will follow up the client's comments and suggest them good solutions. Solve client's problems and keeping the clients profit.
Who is in charge of maintenance?Local agent. Client is first, if pump running has any problem on site, our local agent will arrival the plant within 24 hours.