China Business Purpose Vehicle LIFAN Seasion LF5029
Negotiable /Unit
Min.Order:1 Unit
Chongqing Lifan Industry (Group) Imp. & Exp. Co., Ltd.
Broader wheel track:The broader the wheel track is, the higher the stability will be. The broadened front/rear wheel track can prevent the sidesway during turning operation, so the safety is enhanced.
Impact absorbing area same as that of a car:The longitudinally positioned impact absorbing structure used in cars is adopted, and 6 impact absorbing grooves are arranged at the front end of the beam, which can absorb the impact energy in sequence.Ensure the safety of drivers and passengers to the largest extent.
Secure semi-integral body:High strength integral body construction is adopted, and high-tension steel plates are widely used; the welding robots ensure high precision in welding process, so the body structure has the strongest impact resistance and deformation prevention capability. The impact resistance capability is enhanced by a large margin, and with the 360 degree protection system for driver, the driver can be fully assured about the safety.
9 reinforcing beams for the chassis:The reinforced chassis technology improves the load bearing capacity and safety of the M-VAN.The cross beam is pressed into shape with 2.0mm steel plate (traditional M-VAN use1.4mm cross beam ); the cross-section thickness of the front, middle and rear sections of the beam are 68 mm, 70 mm and 72 mm;The floor cross beam is pressed with 1.6mm steel plate (traditional M-VAN use 1.0mm steel plates).
Proportional valve sensing load:The hazards of drifting, sideslipping and loss of steering control can be prevented and the braking length is shorted effectively, ensuring safety in braking.
hicken and high strength doors:The special automobile steel plate with double-sided galvanization is used in the doors, and with integral pressing and forming in once instance, the doors are more thick and firm; with the embedded double impact resistance crossbeams in the doors, safety is doubly ensured.
Retractable steering column:When the automobile is hit with strong impacting force, the steering column will absorb the impact energy and slide and break in an instant, avoiding injury to the driver. The retractable steering column is safer and more reliable, so the driving and riding safety is enhanced.
LIFAN SEASION 's LF479Q5 engine, which is one of the Q series jointly developed by LIFAN and the most influential engine developer-Ricardo Corporation UK, has an arrangement of in-line ,four cylinders, 16 valves, Double overhead camshaft and MPI and has characteristics of small size, light weight, compact structure, high cost performance, high part compatibility, smooth intake/exhaust, higher combustion ratio, high power and low fuel consumption. The power rating can reach 68.5kw, the maximum torque is 112Nm, and the power per liter can reach the amazing 52.5kw。The power of this engine on SEASION is among the top of similar M-VAN. At lower speed, big torque ; at higher speed, the power output is vigorous. It also has very high fuel efficiency, so the cost of operation is reduced significantly.
Extra large inner space:If the rear two row seats are removed, the LIFAN High-end M-VAN with great power --"LIFAN SEASION" (total length 4201mm, width 1650mm and wheel base 2850mm) will radiate with a presence of king in the M-VAN segment.
Extra large passenger space:The extra-long 4.2-meter body of SEASION makes sure that multi- row seats can be installed, which means the internal space can be utilized effectively. More leg room is allowed for passengers.
Over-width backdoor:The trunk has larger room than other M-VAN, and the total volume is 1908L, about 20-30% higher than similar M-VAN. The floor is flat and has a uniform shape, so it has a higher utilization ratio. The owner will not worry about space limitation for his goods. The loading and unloading of goods is more direct and convenient.
1. Welcome all the inquiries from customers, we will reply you asap.
2. Sample order
3. We will reply you for your inquiry in 24 hours.
4. After sending, we will track the products for you once every two days, until you get the products. When you got the
goods, test them, and give me a feedback.If you have any questions about the problem, contact with us, we will offer
the solve way for you.
5. Lifelong maintenance and spare parts supply.
6. More details please contact LIFAN directly. Thanks.
Q1. What is your terms of packing?
A: Generally, we pack our goods in iron frame which can match the shipment terms. If you have legally registered patent,
we can pack the goods in your branded boxes after getting your authorization letters. Or if you have any other requirements please contact LIFAN feel free.
Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages
before you pay the balance.
Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF.
Q4. How about your delivery time?
A: Generally, it will take 30 to 60 days after receiving your advance payment. The specific delivery time depends
on the items and the quantity of your order.
Q5. Can you produce according to the samples?
A: We can produce by your samples or technical drawings. We can build the molds and fixtures. But firstly, please contact LIFAN for more details because not every car models have this service.
Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and
the courier cost.
Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery.
Q8: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them,
no matter where they come from.