Product Details

Zirconia ceramic parts with manufacture ,Zirconia Split Sleeves

Zirconia Split Sleeves are manufactured based on international standards for each connector type. The sleeves are made of high precision quality to enable stable connections.

We offer several kinds of split sleeves with various ferrule pull force requirements for φ2.5mm OD Sleeve used for SC, FC and ST Adaptors.

We also provide sleeves with special configurations such as tapered or chamfered lead in ends. This configuration was uniquely developed by our company to reduce sleeves breakage and ferrule end face chipping and cracking when inserting the connector into the adaptor.

We can also supply custom specified sleeves for optical modules and Device as well. These custom configurations are fully optimized by considering the pull force, length, and outer diameter specification requirements.

Specifications

Manufacture of zirconia ceramic structure
Anticorrosion and eco-friendly
temperature resistance
Best price with good quality

Specifications

Insulation Heat Resistant Electrical Ceramic
-Industry ceramic
-Technical ceramic
-Used for insulation and heat resistan

1. High resistivity
2. Moderate strength
3. Excellent electrical properties
4. Poor heat conductivity (Thermal insulator).
5. Good resistance to thermal shock.
6. Low coefficient of thermal expansion.
7. Good mechanical stability.

Applications:
Heating element holders
Stand off Insulators
Interlocking Insulating Beads
Splitbush insulators
Lamp bases and caps
Regulator parts

The ceramic electronic components

low loss at high frequency. Good insulating , high strength, , low dielectric constant, Great mechanical strength, high air tightness, high chemical stability, etc.

We can produce all kinds of ceramic holders, ceramic support, ceramic tubes, ceramic pipe, ceramic ring, etc. Widely used in electronic components, electronic device and electric products. Our products meet the international standards.

Various types of ceramic shells

Our products have the feature of high insulation, high temperature resistance, cubage compact, shockproof and high mechanical strength, etc.

Property list for Electronic insulation ceramic

Item		Unit	Steatite ceramic	95 Al2O3	96 Al2O3
Physical Characteristics	Bulk density	g/cm3	2.7	3.6	3.6
Physical Characteristics	Water absorption	%	0	0	0
Mechanical Characteristics	Flexural strength	Mpa	145	320	340
	Hardness Vickers	Gpa	5.7	12.2	13.5
	Elastic modulus	Gpa	120	280	320
	Poisson’s ratio	-	0.21	0.22	0.23
Thermal Characteristics	Linear expansion coefficient	20-5000C 10-6/0C	7.9	7.1	7.2
	Thermal conductivity	w/(m.k)	2.5	16	24
	Specific Heat	10-3J/(kgK)	0.75	0.78	0.78
Electrical Characteristics	Dielectric constant(1MHZ)	-	6.2	9	9.4
	Dielectric loss angle	*10-4	18	15	5
	Dielectric strength	*106V/m	18	12	15