equipments producing Textile, Coating, Colour Fastness Xenon Lamp Aging Test chamber
USD $10,000 - $30,000 /Set
Min.Order:1 Set
Guangdong Sanwood Environmental Chambers Co., Ltd.
Factory direct Xenon lamp aging test chamber / Carbon Arc xenon lamp weatherometer
taiwan factories equipments producing of Xenon Climate Aging Test Chamber
changzhou machinery Spectrum Simulation Xenon Short Arc Accelerated Aging Test Chamber
Factory direct machine manufacturers SM- D047 Laboratory Xenon Accelerated Aging Test
Chineses machine manufacturers of Xenon Lamp Weather Resistant Aging Test Chamber
Factory direct equipments producing Xenon Lamp Aging Test Chamber
Xenon Lamp Aging Test Chamber
Xenon Lamp Aging Test Chamber adopts the xenon arc lamp that can simulate full sunlight spectrum to reproducedestructive light waves existing in different environments so as to provide the corresponding environmentsimulation and acceleration test for scientific research, product development and quality control. It is approved by many OEMs in the automotive, paints and coatings, and plastics industries as the exclusive platform to deliver accurate, and repeatable results for predicting service life.
Our Xenon Lamp Aging Test Chamber operating principle:
Detail images our Xenon Lamp Aging Test Chamber
Our Xenon Lamp Aging Test Chamber specification:
Aging Chamber Model | SM-300XD | SM-800XD | SM-1200XD | |
Inner size(W*H*D mm) | 600*800*600 | 900*900*900 | 1000*1200*1000 | |
Water cooled xenon lamp power(kw) | 4.5KW | |||
Aging Chamber Performance indicator | Temperature range | RT+10℃~90℃ | ||
Gumidity range (light) | 10%~70%R.H | |||
Gumidity range (dark) | 10%~95%R.H | |||
Rainfall time | 1~9999h/59min adgustable | |||
Rainfall cycle | 1~9999h/59min adgustable | |||
Illuminant | 280nm~800nm | |||
Irradiance deviation | ±0.1 W/m2 | |||
Ultraviolet radiation intensity | 150±8mW/cm2 | |||
UV illumination distribution | 90% Uniformity of 90% | |||
Irradiatometer | meet the test requirement | |||
Irradiance calibration function | Automatic calibration, and meet the requirements of the National Metrology Department | |||
Xenon lamp power | 4.5KW(life span:2000h) | |||
Effective radiating area | 190*422mm | |||
Temperature and humidity control system | Accuracy range | Set location precision :temperature±0.1 humidity±1%R.H | ||
Temperature and humidity sensor | Platinum resistance.PT100Ω/MV | |||
Heating system | independent system-wide , Ni Cr alloy electric heating type heater | |||
Humidity System | External isolated, stainless steel shallow surface evaporative humidifier | |||
Black Panel Temperature | 40-110℃ | |||
Water supply system | Bring filter,Automatic control by humidifying water. Cooling water loop xenon lamp | |||
Temperature controller | Imported weinview color touch screen and PLC control module Siemens Germany | |||
Cycle system | High quality carbon steel phosphating, electrostatic spray processing | |||
Material used | Outside mertail | High quality carbon steel phosphating, electrostatic spray processing | ||
Outside mertail | SUS304 stainless steel plate | |||
Sample material | SUS304 high quality stainless steel bar | |||
Door insulation | High temperature aging silicone rubber door seal | |||
Xenon Lamp Aging Chamber Safety protection | Leakage, short circuit, over temperature, water shortage, motor overheating, over current protection | |||
Xenon Lamp Aging Chamber Supply voltage | AC380V±10% 50±0.5Hz Three phase five wire system Phase |
The shipment of our Xenon Lamp Aging Test Chamber
Thank you for viewing this page,Bella wish you have a nice day! If you want more information about our Xenon Lamp Aging Test Chamber ,please contact Bella at:
Skype:climatic-chamber004
Email: sales4@climatic-chambers.(com.tw)