IEC 60529 Rain chamber
USD $7,500 - $8,500 /Piece
Min.Order:10 Pieces
Guangdong Sanwood Environmental Chambers Co., Ltd.
IPX5 rain proof test machine simulates the water drip environment to test the water resistance and sealing of the samples during storage, transportation and usage. It is widely applied to electrical and electronic products, lamps and lanterns, electrical cabinet, electrical components, automobile, motorcycle and ispare parts & other products.
It provides the basis to improve the performance of the products. Protected against water jets - Water projected at all angles through a 6.3mm nozzle at a flow rate of 12.5 liters/min at a pressure of 30kN/m2 for 3 minutes from a distance of 3 meters. Meet the requirement of IEC60529 standard IPX5 water pouring test and IPX6 water jet test.
Widely used for electric products assessment, shell and seal in the rain environment can ensure that equipment and components good performance test. This product uses scientific design, makes the equipment can realistic simulation drop of water, water spray, splash water, water spray, etc., various kinds of environment. Into the comprehensive control system and the adoption of the frequency conversion technology, which makes the rainfall test product frame rotation Angle, jet pendulum rod swing Angle of water quantity and the oscillating frequency can be automatic control.
Chapter 1: The main technical parameters for SMC-LY-1000C
01. | Equipment performance: Products performed as the test equipment for waterproof & water resistance for products. |
02. | Product Name: Programmable IPx5 Waterproof Test Chamber |
03. | Machine Model: SMC-LY-1000C |
04. | The dimensions 1000 x 1000 x1000mm (D x W x H) |
05. | Volume 1000L, Gross Weight: 400 kgs |
06. | External dimensions of approximately 1250 x 1500 x 1380 mm (D x W x H) |
07. | Test bench area: Ø500mm. |
08. | Pore size: the number of holes 25 |
09. | Swing pipe sprinkler aperture: Ø 0.4mm |
10. | Water hole spacing: 50mm; (can be adjusted) |
11. | Spray ring radius: R400mm; Water spray hole spacing: 50mm; |
12. | Sprinkler pipe diameter: Ø16mm; |
13. | Pendulum swing angle tube width: 0-270 ° |
14. | Swing speed: 60°/s adjustable |
15. | Spray pressure: 0~400Kpa adjustable |
16. | Water supply quantity: According IPX3/4, IPX5/6 adjustment; |
17. | Speed test bench: 1 ~ 10r / min. |
18 | Spray volume: 0.07(1±5%)L/min (Every hole in average) |
19 | Spray nozzle: Spherical laser drilling,direction: 360°adjustable, make injection of rain fan, to spray the specimen |
20 | Specimen rotative speed: 4~17rpm (Adjustable) |
Chapter 2: Mechanical structure design:
01. | Using a programmable controller PLC touch screen control, control pendulum tube angle, swing frequency, the turntable speed, select the spin tube and put the tube, and the cycle time is set, the control system is equipped with Schneider execution components. |
02. | Outside box material: Using galvanized sheet with advanced powder paint or Heatproof and cold resistant steel plate (SUS # 304) |
03. | Placed tubes, pipes and turntable spin independently of the control system, select the pendulum tube coils can not start, choose the pendulum tube coil can not start. The time set to control several independent systems, respectively. With a water filter, import execution components. |
04. | The oscillating tube: The motor / inverter drive reducer / eccentric institution / rack gears and other mechanical Tuan action implementation. Adjust the pendulum tube using the frequency count (per unit time), adjust the angle of the eccentric body. |
05. | Work rotation: motor driven worm gear rotates with the drive speed to 5 ~ 17r / min, with anti-rain test piece at the coupling interface. |
06. | Nozzle: Depending on the size of the specimen to determine the bending radius of the oscillating tube. Special nozzle for detachable nozzle spray holes can be replaced at any time in accordance with the standard requirements of the aperture to allow uniform droplets emitted, adequate traffic. |
07. | Water tank: stainless steel tank with water pumps, water filters, water float valve, drain valve, such as the need to be heated, the tank can also be fitted. Electric heating and temperature control. Can be automatically backwater, circulation type. |
Chapter 3: Pendulum tube rain test ways : IPx3
01. | Swing pipe sprinkler Aperture: ø0.4; Test time: 10min |
02. | Water hole spacing: φ50mm |
03. | Spray radius of the ring: φ500 (mm); Sprinkler pipe diameter: ø16mm |
04. | Pendulum swing angle tube width: ± 45 ° ± 60 ° ± 90 ° ± 180 ° (IPX3 pendulum tube angle: 60 degrees left and right, a total of 120-degree swing tube rain). |
05. | Swing speed adjustment: 0 to 30 rpm / min (adjustable) |
06 | Rain water pressure: 0.1 ~ 6bpa adjustable |
07 | Water supply quantity: Under 4bar pressure, flow to 39.2L / min |
08 | Test rig speed: 0 ~ 20 rpm / min (adjustable) |
09. | Test bench area: ø400mm, bearing the weight of 15Kg, rack 0 ~ 300mm adjustable. (Blowhole to sample distance) There are power lead test holes, external power supply box on 11, another spray point in time can be adjusted. |
Chapter 4: IPx5 & IPx6 Waterproof test device technology parameters:
01. | (1).Meet the EN60529 / IEC529 standards of IPX5 and IPX6 the flush nozzle each set (including corrugated hose, hand valve, pressure device: water pump, two sets of, independent, this device another independent installation and adjustment of water flow back to relief valves.) |
02. | (1)IPX5: spray holes of 6.3 mm, adjustable amount of water, can meet the 12.5 L/min (100 L/newspapers) + 0.625 L/min; The nozzle surface distance from shell specimen should be 2.5 ~ 3 m; (2)Test method: the center of water from the nozzle diameter at 2.5 m for 40 mm circle, specimen surface water every square metre shell time about 1 min, test specimen at least 3 min, |
03. | (1)IPX6: spray holes of 12.5 mm, adjustable amount of water, can meet the 100 L/min (6000 L/newspapers) + 5 L/min; (2)Test method: the center of water from the nozzle diameter at 2.5 m for 120 mm circle, specimen surface water every square metre shell time about 1 min, (3)Test time: at least 3 min, (4)The nozzle distance: the nozzle surface distance from shell specimen should be 2.5 ~ 3 m; |
04. | The IPX5/6 amount of water is adjustable, can achieve 100L/min; (6000L/hour ±5L/min) |
IPX5 Test Methods: There's a 120mm circle at separately nozzle at 2.5 m in the main water flow, the water spray time is about 1 min per m2 at the sample shell. The time is at least for 3 min, the space between spray nozzle and sample shell is about 2.2~3m;This equipment contains the water tank.
IPX6 Test Methods: Test equipment and test condition: water tank. The dimension should be make the sample in the water tank, the bottom of the distance to the surface at least 1 m. The distance from top of sample to the surface should be at least 0.15m. Test time: 30 min
IPX7 Test Methods: Test equipment and test condition: water tank. The dimension should be make the sample in the water tank, the bottom of the distance to the surface at least 1.5m.
Chapter 5. Control System /5-1 The controller combination
01. | Types & Parameter : | Korea TEMI1700 controller |
02. | Controller Origin : | Touch Screem System |
03. | Features Controller 01: | Detachable display and control unit |
04. | Features Controller 02: | Heat and Cool Control Support |
05 | Features Controller 03: | Humid and De Humid Control Support |
06 | Features Controller 04: | The touch interface like the picture clear quality |
07 | Features Controller 05: | 18bit A / D converter through a high precision control |
08 | Features Controller 06: | 120 patterns with 1200 segment operating various programs |
09 | Features Controller 07: | DI 16 points , DO 12 + 20(option) points built in |
10 | Features Controller 08: | Displays humidity automatic, manual selection |
11 | Features Controller 09: | In High temperature and humidity, low temperature and humidity, the differentiation of humidity control |
12 | Features Controller 10: | Digital recorder function |
13 | Features Controller 11: | Users screen configuration support |
14 | Features Controller 12: | SD memory card support |
15 | Features Controller 13: | Provided free of charge to PC Software |
16 | Features Controller 14: | VESA Mounting Support |
17. | Features Controller 15: | Korean, English, Chinese, Japanese, Russian support |
Chapter 6. Safety Protection System
01. | Leakage and surge protected : | Leakage circuit breaker to prevent leakage protection electronic surge protection. |
02. | Prevent power surge protection : | AC power primary side controller with arrester ZRN device |
03. | Overload protection device : | (1)Three-phase AC power supply owe. Reverse phase overcurrent protection with the load (overload) ; |
(2)High temperature operation control over temperature protection, high temperature, low temperature over-temperature protection settings | ||
04. | Compressor protection : | (1) Refrigerant pressure protection and overload protection devices. |
(2) Refrigerant pressure protection and overload protection devices. | ||
(3) Internal compressor overheating protection. | ||
(4) High and low pressure compressor protection. | ||
(5) Compressor start abnormal protection. | ||
(6) Compressor oil differential protection. | ||
05 | Fault exception protection : | Turn off the power , malfunction indication and alarm output signal when a fault exception occurs. |
06 | Protection comment : | (1) A group of humidification barrel dry protection switch. |
(2) A group of humidification reservoir when water level is too low to protect. | ||
(3) A group of heating system protection switch. | ||
(4) Heater circuit protection. | ||
(5) Temperature and humidity over equilibrium devices. |