Specifications
1. Ploycarbonate panel2. UV coating & high impact
3. 5 to 10 years warranty
4. Verified by SGS
5. Customized size & color
polycarbonate Embossed Sheet
1. ISO9001:2008 proved
2. More economical
3. Good impact resistance
PC embossed solid sheet is made by polycarbonate resin. On the basis of common pc solid sheet’s technique and improvements of molds and production, the optical properties are changed as the surface structure of the product varies. Single side of pc embossed sheet contains UV protective layer, therefore, its mechanical properties, fire retardation, applicable temperature and chemical properties are consistent with common solid sheet. By changing the physical shape of the surface, when light gets through the embossed sheet, it produces light scattering to get a vague hazy effect. Currently, pc embossed sheet is very ideal architecture material.
| Features Of Foshan Tonon Bayer Polycarbonate Sheet |
1. Light Transmission The light transmission reaches 12%-82% depending upon colour and thickness. |
2. Thermal Insulation Proprietary hollow form contributes to reduce the energy consumption and therefore energy costs. |
3. Fire Retardancy According to GB8624-1997, the fire retardant classification of TONON project sun sheet is B1. |
4. Impactresistance Its outstanding toughness offers greater protection against breakage during transportation, installation and usage. The impact strength is 10-27 times as much as plexiglass. |
5. UV-Protection Attributing to the proprietary UV surfaces. Remain perfect mechanical and optical properties after exposed to extreme weather for a long time. |
6. Sound Insulation The hollow from and polycarbonate resin offer significant advantage to the sound insulation. |
7. Weatherability It have good weather ability can maintain excellent properties in a wide temperature range form -40 °C to 120 °C. |
8. Easy installation Easy installation can be cold bent. |
Technical features of Foshan Tonon Bayer Polycarbonate Sheet
| No. | Character istics | Unit | Data |
| 1 | Impact Strength | J/m | 850 |
| 2 | Light Transmission | % | 88 |
| 3 | Specific Gravity | g/cbm | 1.2 |
| 4 | Coefficient of Thermal Expansion | mm/m °C | 0.065 |
| 5 | Service Temperature | °C | -40 °C ~+120 |
| 6 | Heat Conductivity | W/ sqm * °C | 2.3~3.9 |
| 7 | Tensile Strength | N/sqmm | ≥ 60 |
| 8 | Flexural Strength | N/sqmm | 100 |
| 9 | Modulus of Elasticity | Mpa | 2400 |
| 10 | Tensile Stress at Break | Mpa | ≥ 65 |
| 11 | Elongation at Break | % | >100 |
| 12 | Specific heat | KJ/kg*k | 1.17 |
| 13 | Heat Deflection Temperature | °C | 140 |
| 14 | Effect of Soundproof | 10mm PC Hollow Sheet | Attenuation 20 db |
Specification of Product
- Thickness: 2.7mm
Length: 30M ( 98FT )
Width: 2100mm ( 7FT ) - Color: Clear, green, blue, etc.
Special specification and color are available. - The surface is paved by single-face PE protective film.
Storage, transportation and usage
- Prohibit contact with wet cement surface and acid, alkaline material surfaces.
- Prohibit contact with organic solvents and glue, paint composed thereof.
- Keep the frame clean and the surface of rabbet groove flat. Dust and dirt of the sheet are generally wiped by soft cloth or sponge with mild detergent first and then washed by water thoroughly.
- Choose the right thickness, allow flexure radius.
- If use self –drilling screws for fixing, the hole must be pre-drilled, and the aperture should be 1.5 times larger than the diameter of the screw. Do not tighten the screw strongly, otherwise stress will arise, and crack on the sheet surface will appear.
- Remain space for expanding, pay attention to inserting depth. Expanding Value = linear expansion coefficient × length × the maximum temperature variation (linear expansion coefficient of pc sheet is 7×10-5mm/mm/°C ).
- Use neutral glass cement and right gasket. Never use gasket of PVC material.
- Use electrical tools ( tungsten carbide saw ) to cut, stabilize PC sheet to prevent their vibration. Don’t peel off protective film when cutting.
- In case that marks have to be made before cutting, try to mark on protective film. If the marks must be made directly on PC sheets, use wax crayon instead of any sharp tool to mark.
- Never peel off protective films until installation is completed
- It is suggested that smooth side is installed towards sun in order to realize the effect of the UV protective layer.
Application
- Commercial Building Lighting
- Industrial architecture lighting
- Stadium roof and indoor play area
- Transportation infrastructure
- Residential architecture lighting
- Exterior–protected construction and curtain wall
- Bathroom and swimming pool
Our Factory Location:
Note: Foshan, a city where is near Guangzhou Port in Guangdong Province, China.
Our Canton Fair:
| Clean And Maintenance: |
| In case there is any filler, grease or paint adhered or polluted the surface of the pc sheet, remove it with a piece of soft cloth soaked with alcohol it become hardening. Never use the benzene, gasoline, acetone or carbon tetra chloride of cleaning, do not clean the sheet with any solvent exposed under direct sunshine or under forced bending, for it may crack. Generally wipe off the dust and dirt on the pc sheet by a piece of soft cloth or sponge soaked with neutral detergent first, rinse it with clear water thoroughly, and dry it with a piece of soft cloth finally. |
| To Clients and Readers: |
| This information and our technical advice whether verbal, in writing or by way of trails are given in good faith but without warranty, and this also applies where proprietary rights of third parties are involved. Our advices does not release you from the obligation to check its validity and to test our products to their suitability for the intended process and uses. The application, use and processing of our products and the products manufactured by you on the basis of our technical advice are beyond our control, therefore, entirely you own responsibility. Our products are sold in accordance with the current version of our General Conditions of Sales and Delivery. |
Length: not limited
Max width: 2100mm
Thickness: from 1mm to 18mm
Material: Makrolon Polycarbonate resin from Bayer, Germany
Product line: 4 lines for hollow polycarbonate sheet and 3 line for solid polycarbonate sheet.
Customized colors and dimensions available upon request contact us!