Specifications

servo motor injection molding machine price
Standard model
Variable Pump model
SV Motor Energy Efficient
Japan technology

servo motor injection molding machine

HWE is whole joint-body machines. This series machine has improved the machining accuracy of the part of the machine and precision of assemnly, as well as its rigidity, intensity and complete machine performance.

HWS series machines having advantages of other HW series machines are loading with high performance servo motor. Its delivered power vaies with loading power without any excess energy waste. During  pressure  maintenaning period, servo motor consumes little energy for lowering speed of motor while no work in cooling time. Compared with average injection machnes, servo motor machines can have 20%~80%electricity-saving.

 

HANVOS energy-conserving king's series machines have been succeed in manufacturing

"HANVOS" energy-conserving king's series machines have been succeed in manufacturing.The machine which succeed in developing indicate that "HANVOS" enters into the energy-conserving advanced field of the injection molding machine HWJ "energy-conserving king",Which not only inproved the internsity of rigidity of the mechanical part,ut also converient to install and dismantle.Also the appearance of HWJ machine adopts the arcdesign,which can reflecting humanization design of "people fist",keen notion making progress idea "HW" HWL series energy-conservation machines use global advanced energy-conserving science and technology,the new-type energy-conservation injection molding machines of the research,design and manufacture all by oneself.It can reduce the cost of customers greatly!HWL series is the idea machine to all clients. Please see the picture and explanatory note in detaited the HWL series machine as following

 

Main technical parameters

Specification		Unit	HW148
			A	B	C
Injection unit	Screw Diameter	mm	38	40	42
	Screw L/D Ratio	L/D	22	21	20
	Shot Size(Theoretical)	cm3	227	251	277
	Injection Weight	g	207	228	252
	Injection Pressure	Mpa	189	171	155
	Screw Speed	Rpm	196
	Clamping unit	Clamp tonnage	KN	1480
Toggle stroke		mm	380
Space Between Tie Bars		mm	410*410
Max Mold Height		mm	450
Min Mold Height		mm	150
Ejector Stroke		mm	140
Ejector Number		PC	5
Ejector tonnage		KN	38
others
	Max Pump Pressure	Mpa	16
	Pump motor Power	KW	13
	Heater Power	KW	7.6
	Machine Dimension(L*W*H)	mm	4.6×1.4×1.9
	Machine Weight	T	3.7
	Fuel tank capacity	L	290

 

STANDARD FEATURES

- LCD Control System

- Displacement Transducer

- Decompression Control Device

- Cold Start Prevention Device

- Backpressure Adjustment & Control

- Double Electrical Interlocking Safety Device

- Machincal Interlocking Safety Device

- Hydraulic Adjusting Device

- JIS Standard for Ejection and Mould Position

- Low Pressure Clamping Protect

- Automatic Mould Thickness Adjusting

- High Speed Mould Clamping

- Multiply Hydraulic Ejection

- High Tensile Alloy Steel Tie-bar Plated with Hard Chromin

- Especially Big Space and Thickess for Tie-bar

- Automatic Lubtication System

- Spherulitic Iron or Steel Mould Board

- Double Thread Screw Whole Set Alloy Screw Nozzle

 

OPTIONAL FEATURES

- Hydraulic Close Loop Control System

- Curve Comparion between Practical and Setting Value

- Hydraulic Variable Pump for Saving Energy

- Nitrogen Injection Device

- Water Flow Regulator Gavge and Temperature

- Hydraulic Safety Interlock (Standard for HW428V-HW768V)

- High Resists Attrition Oil-less Alloy Brushing

- Double Alloy Barvel and Screw

 

MOLD LOCKING UNIT

l The burring , double-toogle three-link-rod five-hinged has the features of smooth motion ,large moving die stroke .

l Fine rididty, four-stage mode lock pressure, speed, defferential quick mode lock device have multiple means of ejection functions.

l Automatic centralized lubrication system.

l Gear regulating the mould driven by oil motor.

l Electrical &mechanical safety protection device.

 

INJECTION UNIT

 

l Dual-cylinder parallel injection;

 

l Low speed high torque oil motor directly drives screws to complete the pre-injection, with anti-dripping device.

 

Multiple-stage control for pressure, speed, position to inject, keep pressure, charge material

 

CONTROL UNIT

 

l It utilizes the plastic jetting-moulding machine special-purpose computer ,CPU work division control treatment ,the ejection.

 

l Clamp ,injection actions can choose linear displacement sensor for its control .

 

l It also real-timely monitors various actions and gives automatic warning for its defects.

 

l Multiple-unit plastic moulding data memory system.

 

 

HYDRAULIC UNIT

l It employs the imported hudrautic elements and components,uses the propotional pressure, propotional flow means ,offers live load dynamic force.

l Double injecting move jar vertical balance on both side of injection tube ,insured that spray nozzle can not be skew .

l The sealing is good and do not leak the glue.

l Low noise & rapid response oil pump system

l Adopt the cooling water flow distributor,controlling the cooling temperature easily.