Specifications
easy controlhigh efficiency
low noise
pass CE
standing seam metal roof machine
standing seam metal roof machine
standing seam metal roof machine Technical Parameters:
Material Spec: colored steel sheet; galvanized steel sheet
Thickness of coil sheet: 0.3-0.8mm
Main Motor Power: 4 kw
Forming Speed: 10-12m/min
Hydraulic station power: 3kw
Quantity of stand:about 14 or 16 stands
Hydraulic pressure:10-12mpa
controlling system: PLC
Index error of length:10m+2mm
Total weight: about 6 tons
Voltage: 380V 3phase 60 HZ or at buyer's requirement
Material of main equipment
Roller material: high grade NO.45 forged steel, plated hard chrome on the surface of roller with
thickness 0.05mm
Active shaft material: high grade NO.45 carbon wrought steel at Φ 72mm
Cutting blade: Cr12 mould steel with quenched treatment.
standing seam metal roof machine PROFILE DRAWING
metal roofing roll forming machine
No. | Item | Description |
1 | Forming Speed | 8-15m/min(not including cutting time) |
2 | Roller stations | 15stations &15 stations |
3 | Material of Roller | GCr12 |
4 | Material of Main Shaft | 45# steel finishing machining and then slack |
5 | Material of Shaft | 70mm 45# steel forged |
8 | Main Power | Driven Motor Power 3kw Hydraulic Station Power 4kw |
9 | Customer requirment | Sheet profile as your drawing |
10 | Dimension(L*W*H) | 7500mm*1500mm*1500mm |
11 | Material of Cutter | Gcr12 |
12 | Driving Mode | single chain 1 inch |
13 | Material Thickness | 0.15mm-0.8mm |
14 | Power Supply | 380V, 60HZ, 3 PHASES |
15 | Cutting Accuracy | ±2mm |
16 | Hydraulic Station | 12.0 Mpa |
OUR advantage
our certafication
our metal roofing roll forming machine accessory part
we are together with customer
machine pictures