Atlas Copco (Bolaite) 30hp 7 bar middle pressure air compressor

Main spare parts of 30hp middle pressure air compressor :

1.Air Filter: in general, we should clear the dust o the surface of air filter every 1000hours,and the method is to blow down the dust from inside to outside.

2.Air Inlet Valve: When starting,stopping or emptyit all uses the two-way solendid valve action to control the air inlet valve piston and up close valve.If the pressure resches the upper limit valve of pressure switch,the

pressure switch will act,and the two-way solenoid valve begins to discharge and pushes up the air lnlet piston to close the valve and become empty load state.

3.Oil filter: oil filter is a kind of filters of paper characteristic with the function to remove the impurities in oil,such as mental particles,oil deterioration and so on,its filtering precision is between 10μ-15μ,which will well pretect the bearing and rotors.

4.Cooling System:cool air sucked by a circulating fan to blow over the heat dissipating fins of cooler and exchange heat with compressed air and lubricating oil to reach the cooling effects.

Air& Oil Flow Chart of  30hp middle pressure air compressor :

Features of  30hp middle pressure air compressor :

Technical parameter of  30hp middle pressure air compressor :

Motor & Bearing of  30hp middle pressure air compressor  

Air end of  30hp middle pressure air compressor :

Shipment mode of 30hp middle pressure air compressor :

Atlas Copco Air Compressor your first choice!