45T Semi Auto Plastic injection molding machine
| Specifications: | |||||
| MODEL | UNIT | ZY-350ST | |||
| Screw Diameter | Mm | 30 | 32 | 35 | |
| Injection Pressure | kg/cm² | 1170 | 996 | 820 | |
| Theoretical Shot Volume | cm³ | 81 | 92 | 110 | |
| Max.Shot Weight(ps) | g | 74 | 84 | 106 | |
| Safe Shot Weight(ps) | OZ | 2.6 | 3.0 | 3.75 | |
| Max.Shot Weight(ps) | cm³/sec | 62.5 | 71 | 95 | |
| Injection Rate | mm | 115 | |||
| Screw Speed Max. | rpm | 0-190 | |||
| Nozzle Comtact Force | Tons | 4.45 | |||
| Nozzle Retraction Stroke | mm | 190 | |||
| Number of Temperature Control | 3 | ||||
| Clamping Force | Tons | 45 | |||
| Platen Size | mm | 580*430 | |||
| Distance between tie bere | mm | 410*250 | |||
| Min.Mold Height | mm | 220/70 | |||
| Opening Stroke | mm | 200 | |||
| Max.Open Daylight | mm | 420/270 | |||
| Ejetor Force | Tons | 1.76 | |||
| Ejetor Stoke | mm | 35 | |||
| Max.Hydaulic Pressure | kg/cm² | 140 | |||
| Pump Output | l/min | 37.2 | |||
| Oil Resservoir Capacity | l | 130 | |||
| Cooling Waer Consumption | l/hr | 600-800 | |||
| Pump Motor Power | KW/HP | 5.5/7.5HP | |||
| Berrel Heating Power | KW | 2.8 | |||
| Total Electricity | KW | 9 | |||
| Packing Weight | Kg | 2.4ton | |||
| Packing size(LxWxH) | m | 1.92*1.3*2.3 | |||
Features:
1.Alternate the two lower dies of CY-ST series single-mode cross slide board on a flat surface.The lower die is used for inserted action outside.Because high working safe features,working efficiency can be advanced in a large range . The finished goods are propped up to outside for completion.(Lower die independent thimble)
2.Material tube can be lifted .It is easy to clean stub bar.It is easy to fix die.
Samples produced:
Packaging & Shipping
Contact details