Product Details

fast supplier low price bronze graphite wrapped bearing bush slideing bearing

Main Products

DU bushes

DX bushes

Flange bearing

Bimetal bush

Bronze bush

Bimetal graphite bush

Bronze graphite wrapped bush

Bronze graphite bearing

Thrust washer

Ball retainer

Oilite bushes

Product Description

The standard range of composite plain bearings is very comprehensive and covers almost every standard size. This range comprises straight and flanged bushings, thrust washers and strips.

Sleeve Bearings:

Model No.	Min. I.D.	Min.O.D.	Max.I.D.	Max.O.D.	Max. Length
DU,SF-1	6mm	8mm	300mm	305mm	100mm
DX,SF-2	10mm	12mm	300mm	305mm	100mm
JF800	10mm	12mm	173mm	180mm	100mm
FB090	10mm	12mm	300mm	305mm	100mm
FB092	10mm	12mm	300mm	305mm	100mm
JDB,JCB	8mm	12mm	160mm	180mm	150mm
FU	1.5mm	3mm	50mm	70mm	70mm
JGB	1.5mm	3mm	300mm	320mm	100mm

I.D. = inner diameter

O.D. = Outer diameter

Flange Bearings:

Model No.	Min. I.D.	Min.O.D.	Max.I.D.	Max.O.D.	Min.F.D.	Max.F.D.	Max. Length
DU,SF-1	6mm	8mm	40mm	44mm	12mm	53mm	40mm
JF-800	40mm	46mm	95mm	105mm	60mm	144mm	127mm
FB090	25mm	28mm	300mm	305mm	35mm	340mm	90mm
FB092	25mm	28mm	300mm	305mm	35mm	340mm	90mm
JDB	10mm	14mm	120mm	140mm	22mm	170mm	100mm
FU	6mm	12mm	50mm	60mm	14mm	70mm	70mm
JGB	6mm	12mm	300mm	320mm	35mm	340mm	130mm

I.D. = inner diameter

O.D. = Outer diameter

F.D. = Falnge diameter

Technical Parameters:

Max Load Pressure	Static load	120N/ mm²	Hardness	HB 90-120
Max Load Pressure	Dynamic	40N/ mm²	Extension Rate	40%
Max Sliding Speed V		2m/s	Working Temperature	-100℃~+200℃
Maximun PV value		2.8N/mm2.m/s	FrictionCoefficient	0.01~0.05
Tensile Strength		450N/mm2	Thermal Conductivity	60W(m.K)-1
Yield Strength		250N/mm2	Coefficient of thermal expansion	12x10-6K

Packaging

Shipment

Technical Process

Why US

Our Advantages for bearing slideing bearing

1.Insensitive to dirty environments

2.Resistant to shock loads and vibrations at slow speeds

3.Good resistance to corrosive conditions

slideing bearing application

slideing bearing bronze material as the base, made of solid lubricants embedded inthe surface. Due to the high elongation ofthe copper alloy material as the substrate, it can be made especially thin rolledbushings, plus the ideal filler material is anti-wear agent, it is applied in the automotive transmission as a wear sleeve use can also be used in other occasions

Team

If you have any problems , please do not hesitate to contact me !

Tel:+86 553 6851660

Phone:+86 15212228380

Whatsapp:+86 17756525121