Name: SK03 miniature slide switch 12v
Brand: Khan
Availability: InStock

Product Details

P/N: SK01 miniature slide switch 12v

interrupteur tactile, takt schalter, interruptor contacto, interruttore tattile, interruptor tacto, interruptor táctil, takt schaltung, herd schalter, intérrupteur

*Applications

MP3,MP4, digital camera,Mobile, Video intercom,Electronic Toy,etc.

*Features

Enviromental Temperature	-25~+70℃
Relative Humidity	(40°C) ≤ 95%
Rated Load	DC 12V 50mA
Contact Resistance	50mΩ max.
Insulation Resistance	≥100MΩ
Withstand Voltage	AC250V, 50Hz /min
Life	10,000 cycles above

*Dimensions

*Packing Specifications

bulk packing:

Taping:

* Soldering Conditions

Condition for Reflow

1. Heating method

Double heating method with infrared heater.

2. Temperature measurement

Thermocouple 0.1 to 0.2 Φ CA(K) or CC(T) at solder joints (copper foil surface). A heat resisting tape

should be used for fix measurement.

3. Temperature profile

(1) The above temperature shall be measured of the top of switch. There are cases where PC board's temperature greatly differs from that of the switch, depending on the material, size, thickness of PC board's and others. Care, should be taken to prevent the switch's surface temperature from exceeding 260°C.

(2) Soldering conditions differ depending on reflow soldering machines. Prior verification of soldering condition is highly recommended.

Manual Soldering

Items	Condition
Soldering temperature	350°C max.
Duration of soldering	3s max.
Capacity of soldering iron	60W max.

1. Consult with us for availability of TACT switch washing.

2. Prevent flux penetration from the top side of the TACT switch.

3. Switch terminals and a PC board should not be coated with flux prior to soldering.

4. The second soldering should be done after the switch returns to normal temperature.

5. Use the flux with a specific gravity of min.0.81

Use Notes:

1. Terminals to carry our welding, if the load imposed on the terminal, it may be relaxed, deformation and deterioration of the electrical characterisics due to the different conditions, please note that when in use

2. The use of through holes brushes circuit board and other recommended board, due to the heart stress of change, so please pre-conditions on the welding and full recognition.

3. Welding on the set of conditions needed to confirm the actual conditions of mass production.

*Advantage

*Certification

*Logistic

Kanghong Electronic which trademark as khan, we produce high quality electronic switches, product range including tact switch, micro switch, push switch, rocker switch, door lock switch and switch cap etc. Slide switch as our product, developed to multiple series, including slide switch 3 position, slide switch 2p2t which also called DPDT slide switch, smd mini slide switch. We garauntee our quality and make each switch with excellent quality.