Product Details

Product Description

60x60 diffused square led panel light,60x60 led ceiling panel,led panel 1200x300

This backlight LED panel 60x60 light is a kind of elegant indoor lighting lamp.Adopt sheet metal forming process with white paint surface treatment, embody a perfect texture;

Its light source is adopted with SMD2835 and the light becomes equally and with good color tolerance after adopting the high transparency PMMA diffuser plate.

The Backlight LED panel lights are mainly applied to commercial lighting, home lighting
and office environment.

Feature of led panel 2x4 ft:

Luminous efficacy: Reach up to 80lm/W;
Light sourse: Adopt high brightness SMD2835;
Power supply: PF>0.95,THD<10%,Surge>2KV.
Appearance: Spray white paint on the shell, looks elegant;
Production Capacity: 300,000pcs per month

Specification of led panel 2x4 ft :

Item No	Power(W)	Light Output(lm)	Lighting Intensity(lx)			Size (mm)
Item No	Power(W)	Light Output(lm)	1M	2M	3M	Size (mm)
Panel-30x120	38	3000	1150	300	150	295119556
Panel-60x60	36	2900	1150	300	150	59559556
Panel-60x120	54	4050	1600	400	200	595119556

Dimension drawing for size 120x30cm,120x60cm,60x60cm:

Application of led panel :

1.offices,conference rooms,metting romms,factories

2.Residential lighing:living romms,bedroom

3.Commercial lightin:hotesl,shops,stores

4.Shcools,colleges,universitis,hopitals

Light Source Test Report

Wire connection photos

Installation of led panel 60x120 cm

A.recessed installation
1. cut a hole with suitable size on the ceiling, and set the T-shape keel beam in advance(please refer to the products cut hole
size table);
2. make the lamp house installed in the hole, then connect the electric supply L,N electrodes to the related Led controllers' L, N.;
3. set the lamp body steadily on the T-shape keel beam, turn on the power;
Attention: if your T-shape keel beam cannot be able to bear the lamp's weight or any other risks, please add the steel ropes to guarantee
the installation’s stable.

B.surface mounted installation
1. set the steel ropes fixed on the ceiling.
2. set the steel steel ropes connected to lamp house stability, then adjust the rope length to make the lamp house on horizontal position.
3. connect the electric supply L,N electrodes to the related Led controllers' L, N.
4. turn on the power
Attention: The led light source cannot to be replaced, please do not open the lamp body or unscrewed the screws among the LED light source, or
the heating performance of the LED light source will be influenced, make the lifespan shorter, even the led burnt.
Caution:the lamp body cannot be able connected to the AC Commercial power directly, must via the led controller to supply.

Aging test picture:

Accessories