Specifications

1.New laser cutting machine ce Italian Imported Belt with Stepper Motor 2.600 centigrade heat treatment,8 meters gantry milling

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Names	B series Acrylic Laser Cutting Bed models
	HS-B1325	HS-B1525	HS-B1530
Work size(mm)	1300×2500	1500×2500	1500×3000
Power	135W
Volume m3)	13
Weight(kg)	1000kg
Exterior dimension(mm)	3470*1892*1178
Wooden case dimension(mm)	3570*1970*1178
Transmission model	Steel belt is fixed, the gear transmission
The max free speed	48m/min
Reprecision	±0.01mm
Working power supply	AC220V±10% 50HZ
PositionaI accuracy	0.02mm
Total power	≤ 1800W
Temperature	0°C-40°C
Humidity	5-95%
Formats	DXF,AI,PLT,CDR,BMP,PLT,DST
Applied Materials	Apply to cut acrylic, LED light panels, MDF fiber board, composite board, advertising decoration materials, electrical panel such as cutting, designed for high precision cutting of the user

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1.If there is no special requirements,the ray intensity should be less than 80 percent,thus to avoid the tube aging quickly.

2.Water temperature should be examined at all times during the working process.Once the water turns to warm,please change it fight away(the right way of changing water is to get out of some some hot water and fill in cold water.

3.Water tank ,water pump and water inlet and out rubber tube should be cleaned once every four days.

4.focal lens should be cleaned after removal.And the lens should be fixed firmly but not too tightly for fear of break after cleaning.

5.The minimum amount of cooling water should not be less than 30L.Make sure that the water can submerge the submersible pump.

6.Do not use circulating water of por quality ,because it may affect the laser power seriously and shorten the service life of laser tube .The manufacturer is not responsible for repairing the laser tube damaged by the using of poor-qualified water.It is suggested to use purified water or distilled water.