Product Details

Specifications

Newest label laser cutting machine for decorative and creative HS-B1530M
12mm MDF,25-30mm acrylic

Product name	Newest label laser cutting machine for decorative and creative HS-B1530M
work size(mm)	1500*3000
power	100W-300W
volume m3)	15
weight(kg)	1550kg
Exterior dimension(mm)	397020701200
wooden case dimension(mm)	407021701300
Transmitting System	Movable gantry, middle driving
The max free speed	50m/min
reprecision	±0.1mm
working power supply	AC220V±10% 50HZ
positionaI accuracy	0.1mm
Total power	≤ 2KVA
temperature	0°C-40°C
humidity	5-95%
formats	CDR,BMP,PLT,GPEG,DXF,DST.etc
Applied Materials	Thin carbon steel, stainless steel(0.5-2.0mm), acrylic and other non-metal materials

The cautions and maintenance of laser engraving machine

1.If there is no special requirements,the ray intensity should be less than 80 percent,thus to avoid the tube aging quickly.

2.Water temperature should be examined at all times during the working process.Once the water turns to warm,please change it fight away(the right way of changing water is to get out of some some hot water and fill in cold water.

3.Water tank ,water pump and water inlet and out rubber tube should be cleaned once every four days.

4.focal lens should be cleaned after removal.And the lens should be fixed firmly but
not too tightly for fear of break after cleaning.

5.The minimum amount of cooling water should not be less than 30L.Make sure that the water can submerge the submersible pump.

6.Do not use circulating water of por quality ,because it may affect the laser power seriously and shorten the service life of laser tube .The manufacturer is not responsible for repairing the laser tube damaged by the using of poor-qualified water.It is suggested to use purifiedwater or distilled water.