Fast curing Neutral silicone sealant for glass
USD $0.8 - $0.8 /Piece
Min.Order:1000 Pieces
Longkou Rensheng Glue Industry Factory
Neutral Silicone sealant
We are the professional manufacturer of the sealant. Our prefessional engineer study and develop the updatest environmetal protective sealant, which is suitable for home decoration. It is Non volatile solvent, fast curing, Water resistance, environmental protection, not mildew, aging. It can be used to seal the frames of the door and window, wall, marble, bathroom installation etc.
The Waterborne silicone sealant
1. Specially suitable for home decoration.
2. Stable and flexible from 5°C -50°C and can keep sealing for at least 10 years.
3. Adheres to a range of common building materials and finishes.
4. Cures to a strong, flexible seal capable of withstanding movement in and around the joint.
5. Non-slumping, can be used in vertical and overhead joints.
6. Easy to use – one part, no mixing required.
7. Can be applied in any season.
8. Resistant to weathering, ultra-violet radiation, vibration, moisture, ozone, temperature extremes, airborne pollutants, cleaning detergents and many solvents.
9. Excellent unprimed adhesion to a wide variety of construction materials and building components
10. Fast curing in 24 hours in summer and 48 hours in winter.
As Supplied – tested at 23°C±2°C, RH50%±5%:
Item | Data | Standard |
Aspect | Tixotropic paste | |
Gravity (g/cm3) | 0.98-1.1 | |
Sag/Slump( mm) | ≤1 | ASTM D2202-00(2006) |
Tack Free Time(min.) | ≤25 | GB/T 13477.5-2002 |
Extrudability(ml/min) | ≥200 | GB/T 13477.3-2002 |
As Supplied – tested at 23°C±2°C, RH50%±5% 7 days :
Hardness, 24H,Shore A | ≥10 | ASTM D2240-05 |
Hardness, 7d, Shore A | ≥20 | ASTM D2240-05 |
Depth of curing(24H, mm) | ≥3 | ASTM C1184-05 |
Depth of curing(7d, mm) | ≥6 | ASTM C1184-05 |
Recovery of elastic(%) | ≥90 | GB/T 13477.17-2002 |
Tensile modulus(MAX)(MPa) | ≥0.6 | GB/T 13477.8-2002 |
Modulus at 100% elongation (MPa) | ≥0.3 | ISO 8339 |
Adhesion failure area(% ) | ≤5 | GB/T 13477.8-2002 |
Elongation at break(%) | ≥150 | GB/T1040.2-2006 |
Volatile content(%) | ≤6 | ASTM D1489-97(2004) |