Product Details

high power cob led car headlight

Model	K16 Fanless led headlight
Single beam type	H1,H3,H4,H7,H8,H10,H9/H11/H16(JP),H16(EU)/5202,9005,9006,H12,D1/2/3/4
Dual beam type	H4 H13 9004 9007
LED chip type	Phi-lips LU-XEON Z ES
Voltage	9-30VDC
Current	2A/13.5V
Operating Power	22W
Lumens	3000LM Low beam & 3600LM high beam
Color Temp.	6000K
Other Color Temp.	3000K,5000K (200 sets/each)
Working Temp.	-45°C~+85 °C
LED chip wrok Temp.	-40°C~+120 °C
Protection	Reverse polarity protection
Life-Span	50000 hours
MOQ	No MOQ for sample test
Remarks	Anti-EMI(anti-electromagnetic interference): S95/54/EC

Features

Ultra-light effect, ultra-low thermal resistance,exceeded Energy Star standards.
Light body heat dissipation all in one design, 360degree heat groove: Double-sided copper PCB board+ High thermal conductivity aluminum+ Copper mesh cooling,perfect thermal design.
Applied with newest copper mesh thermal system, with powerful thermal and heat dissipation, had solved overheat burning problem of LED headlight that caused by fan malfunction.
Copper mesh requires smaller space,optionally bent in different directions, coupled withsmall size cooling pad, suitable for all car types.
Quick start, reach 100% brightness when start up, with incomparable start response rate than HID.
Stationary base separate from light body design, easy to install,with removable stationary base adaptors, it can be changed to different base for separate use, lower the stock pressure.
Ultra small size driver design, connected with light source, easy for installation.
Complied with IP65 waterproof and dustproof standards(Don’t put lamp beads emitting surface into the water, because LED is directly exposed.)
In line with EMI anti-interference requirements, external canbus relay can pass the car computer system.

Product's technology

LED chips

Applied with Philips light source, LUXEON Z ES . Lamp beads packed with thin film flip technology, no gold wire, had improved the function performance of
LUXEON Z ES in high current and high temperature use.

Applied with Phili-ps light source, LUXEON Z ES . Lamp beads packed with thin film flip technology, no gold wire, had improved the function performance of LUXEON Z ES in high current and high temperature use.

LUXEON Z ES only has 2X1.6mm emitting surface,providing unprecedented color consistency, brightness and luminous flux density. Better compact beam angle, higher luminousefficacy, ideal for automotive lighting source. Use 3 pcs lamp beads arrangement with 2 emitting surface design, same as original halogen emitting area(4.8x2mm), light beam pattern has equivalent effect as halogen bulb.

We use the best quality led light source for headlight - PHILI-PS LUXEON Z ES to ensure brightness, good color rendering, much less color fading…etc. The famous brand led chips make you never worry about the quality.

Output light

PCB: Ensure 1st-level heat-dissipation(from chip to PCB)
1. Double-sided red copper with gold-plating: Much better than other suppliers who use silver-plating copper or even aluminum PCB. (Thermal conductivity: red copper:400+, aluminum 200±) high light efficiency, low thermal resistance, meets the Energy Star Standard. ensuring fast heat conduction from chip to PCB,
2. Tiny thickness:1.6mm(2.0mm includes chips at both sides). more focus, enlarge lighting angle, reduce dark area,
3. High precision led chip SMD technology: No pseudo soldering/incomplete welding, won't make chips broken either. perfect heat conduction, making sure led chips working under good situation.

ALUMINUM BODY: Ensure 2nd-level heat-dissipation(from PCB to aluminum body)
1. Good quality: Adopt good aluminum, precisely production,
2. High-tec design: Integrated body(no seperate parts), 360° heat sink,
ensuring fast heat conduction from PCB to body, then from body to copper belt,
3. Small size of top body: Smaller width, thinner ,more focus,
4. Small size of base: Fits for most cars, especially the ones have small headlight installation space,
5. Electroplate surface: A. increasing lighting reflection, B. elegant, high class,

LIGHT PATTERN: Perfect as original
1. Tiny & original emitting point: Chip size: 2.0x1.6mm(center is 1.6x1.6mm),55mil, tiny & focus emitting surface. 3pcs chipe*2group structure, each group is 2.0x4.8mm, same as halogen emitting point,
2. Original lighting pattern of hi/lo(H4,9004,9007,H13): A. high/low track: 3*2pcs led chips lined in a bais/slant direction as precise as original bulbs, derived from original halogen bulb, B. integrated & precise reflector of low beam is imitated from original halogen hi/lo bulbs' reflector, producing perfect lighting pattern,
3. Adjustable H1 and H3: Aluminum body can be spin slightly for adjusting led chip angle,
4. Cutting line & focus point: Clear and right position, no glare, no dark area,

Better Heat-dissipation

Installation

Packaging & Shipping

Packaing

The good looking, colorful packing led headlight box. - Top quality used - very hard. To help improve your business competitiveness. We know packing box design and material is very good for business.

EKLIGHT pay attention to the packing, trying to not only protect the goods better, but also help you to improve business competitiveness, and do more business.

Delivery ways

Company Information

Our Services

Thoughful OEM service

1: OEM logo laser for free on drivers. Remark: MOQ 100 pcs, then laser for free.
2: OEM printing LED kit box - MOQ: 500 sets Remark: if you order kit quanitty over 500 sets, completely for free to help print your design OEM printing hid box.
3: OEM ballast box, bulb box -- MOQ : 2000 pcs.
4: OEM mold: ballast mold, bulb mold, DRL led mold, led headlight mold, led marker mold, new design auto led ...etc. EK have rich experience to help big distributors to customize OEM design products with stable performance.There lots of our distributors already got successful business by EK OEM design products. We welcome to you make OEM products from EK, and EK has professional technician team and excellent service to ensure the perfect OEM products you will get the replacements normally send with next order.

Other Products

FAQ

1. How long will it take to execute my order?

This depends on the the order quantity. our normal delivery time is 3-7 working days.

2. How much will the shipping charges be?
This will depend on the size of your shipment and the method of shipping. When inquired about shipping charges, we hope that you let us know the detailed information such as the post code and quantity, your favorable method of shipping(by air or by sea) and your designated port or airport.

3. Do you provide samples?
Yes, we can provide samples of all the items listed. We can send the samples by DHL, FEDEX, EMS, UPS and ETC.

4. Do you have products in stock?
For most common items we have stock but we do not reserve all the items in the stock. If there is any stock, we will inform you with details.

5. What the warranty term for your products?
All of our products have at least 1 year warranty. Pls provide us the pictures or videos if there is any quality problem during this period.We will replace a new one to you in the next order.

6. Can I visit you?
Sure, Pls let us know if you wanna visit our factory,we will arrange it for you.

7. Do I need to send the defective products back to you for warranty?
No, you don't need to send it back for warranty. Please contact us and we will email you a brochure, guiding you how to ask for warranty for the defective products. If any damage happens not caused by misuse or vandalism, then we'll send you a new one.

8. How to contact you guys?
You can contact us online in TradeManager and Skype (ID: jasperlee0707) Or send us email: jasper @

....