Environment friendly comfort ceiling mounted Electric Infrared Heating Plates
USD $135 - $179 /Piece
Min.Order:50 Pieces
Jiangsu Ecoway System Engineering Co., Ltd.
Ideal shop instant heat healthy Infrared Ceiling mounted Heating Plates
High Energy Efficient Healthy Space Saving Office Radiant Ceiling Panels
Eco Art Office high efficiency electrical Infrared Radiant Ceiling Panel Heater
Low cost maintenance free restautant Infrared Ceiling Panel Heaters
Ceiling Mounted baby room no noise Carbon Crystal Europe Far Infrared Panel Heater
Healthy lifestyle energy saving Infrared Radiant Ceiling Mounted panel heaters
Environment friendly comfort ceiling mounted Electric Infrared Heating Plates
Radiant panel ceiling systems are similar to other air-water HVAC systems with respect to the arrangement of its components. The important difference is that room thermal comfort is maintained primarily by radiant heat transfer instead of convective heat transfer (as is the case with tube and fin baseboard radiation).
Cost and Energy Savings
Energy Savings
A radiant heating system is a much more efficient means of heating an environment than a forced flow system. The cost savings from heating hydronically, as opposed to heating with air, can be as much as 25% in fuel cost alone. This is due to the fact that water is a much better medium to transport heat than air is. The actual amount of energy saved is dependent on many factors including how well the building is insulated, the building size, and the climate the building is located in.
Maintenance Costs
Because radiant panels are out of the way, they are not likely to sustain damage from everyday activities. This is particularly important in high traffic areas such as airport walkways where large numbers of people are walking by with baggage or luggage. Also, since the panels have no dust collecting surfaces, they do not need to be taken apart to be cleaned. This means that the panels will not require periodic repainting due to scratches, dents, or cracking that would be caused by disassembly. Cost savings would be realized during building retrofits, or renovations, by using modular radiant panels that can be reused in other locations without any difficulty.
Construction Costs
There are many ways in which radiant panels can save money in the construction of new buildings. One such area is the amount of pipe it takes to connect to radiant panels. Because both the radiant heating panels and the hot water mains are located in the ceiling, there is no need to drop pipe connections down the walls. All the pipework is up and out of the way.
Increased Floor Space
For office or apartment buildings, the leasable area of a room would be reduced by any wall mounted mechanical equipment around its perimeter. Due to the fact that the panels are up in the ceiling, this space is kept free. This means that the total floor space is no longer reduced by the space conditioning equipment.
How Is It Different From Conventional "Radiation"?
Heat may be transferred by conduction (warmth transferred by objects that are touching each other), or convection (heat that is carried from a warmer to a cooler body by an intermediate fluid such as air) or by radiation. Most conventional tube and fin "radiators" are in fact, convectors. They heat a space by warming the air that passes by the heated fins. This air, now warmer than the surrounding air, rises due to buoyancy. This is known as free convection. Where the air is moved past the fins by a blower or fan it is called forced convection. In either case the idea is the same, to compensate for perimeter heat losses by circulating warm air within the space.
By contrast, between 75 and 90 per cent of the energy from a radiant panel is propagated by thermal radiation. Thermal radiation is an electromagnetic radiation propagated due to a difference in temperature. Therefore, the heat is transferred to all bodies "seen" by the panel that are at a lower absolute temperature than the panel itself.
Why Are The Panels In the Ceiling?
It is often asked "Why put the panels in the ceiling? Heat rises, doesn't it?" The answer is no, heat does not rise. Warm air rises. The panels are most effective in the ceiling because from there, they are best able to "see" the objects in the room. Lights are placed in the ceiling for maximum effect. This is because from above, it is not obstructed by room objects and its light can be most effectively cast on the surroundings. Light is a type of electromagnetic radiation which has a shorter wave length than thermal radiation. Therefore, as with a light, the optimal location for a radiant panel is the ceiling.
Another reason for placing the panels in the ceiling is so that higher surface temperatures can be used. The rate of radiant heat transfer from the panel is governed by the Stefan-Boltzmann Law, q = S Ts4 , which demonstrates that the radiative heat transfer from a body increases dramatically as its temperature is increased. Radiant ceiling panels are typically operated at 79-85°C (175-185°F). On the other hand, were the radiant panels mounted on the walls or near the floor, safety code dictates that the panels could not be operated at high temperatures. Thus by placing the panels in the ceiling, the panels can be made to produce more output per area by simply increasing the water temperature.
Is this a Proven Technology?
Radiant panel technology is not new to the HVAC (Heating, Ventilating and Air Conditioning) industry. It is a mature, proven technology that has been in use in Europe for over 100 years. Over the last 35 years, the Canadian and United States HVAC industry has employed radiant panels in many commercial and institutional settings. In fact, since the much publicized outbreak of Legionnaire's disease (spread by contaminated central air systems), radiant heating systems have been the choice for U.S. Veteran's Administration Hospitals and, in the last 10 years, over 80% of the new hospitals constructed in the provinces of Western Canada have employed radiant panel ceiling heating systems.
A QUICK RESPONSE
Our sales team will reply you 1 hour during working time.
B We will keep you informated about the process of the order.
C AFTER SALE SERVICE
During the warranty period,we will be responsible for reparing products with problem for free.
D CUSTOM DESIGN SERVICE
If you have the requirements about the logo and packing, pls tell us.