Centrifugal Concentrator is a kind of centrifugal concentration equipment. It can be used not only for placer gold mining, but also for hard rock mining to recover the natural gold, replacing the amalgamation. It is also used to recover gold from the gold tailings.
Five STLB series of models are available. Application shows that the recovery rate can be as high as 90%, especially for the case in recovering the natural gold in lode ore with 65% of the ore having a milling size of 0.074mm, the recovery for the natural gold is expected up to 98%, For that natural gold of 0.004mm in particle size, the recovery is 97%. The cleaning up cycle is 1~4 hours, and the upgrade ratio is up to 1,000 times. This equipment is patented in China.

High recovery rate: Through our test, the recovery rate for placer gold can be 98% or more, for rock gold, the recovery rate could reach 97% when the feeding size is below 0.04mm.

High efficiency: Centrifugal concentrator has a capacity of 10-20TPH, and STLB100 centrifugal concentrator has a capacity of 50-80TPH. Only one machine could give you such a high capacity and high recovery rate. It's the most efficient concentration equipment in our factory.

Easy to install: Only a small leveled place required. It's a complete machine, before starting it, only need to connect the fluidization water and power.

Easy to adjust: There are only 2 factors that will affect the recovery result, they are water pressure and feeding size. By giving proper water pressure and feeding size, you could get the best recovery effect.

Easy to operate: After finishing the water pressure and feeding size adjust, what U have to do is to fetch the concentrates every 2-4 hours. (Depending on the grade of the mine)

No pollution: This machine only consumes water and electric power, and exhaust tailings and water. Low noise, no chemical agent involved.

Reliable: The centrifugal concentrator gets a simple & tough structure, the main body is made by strong steel, and the concentrate cone is made by stainless steel. And the bearing is greased to keep it running well.

The main component parts of Centrifugal concentrator is consisted with Concentrating Cone, Slurry Feeding Pipe, Secure Concentrate Plug, Tailing Discharge Pipe, Concentrate Discharge Pipe, Fluidization Water Valve and Water Inlet.

Centrifugal Concentrator is the kind of centrifugal concentration equipment. It can be used not only for placer gold mining, but also for hard rock mining to recover the natural gold, replacing amalgamation. As well as used to recover gold from the old tailings too.
Since 1985, this machine was invented, the technology of the centrifugal concentrator have been greatly evolved. Application shows that the recovery can be as high as 99%, especially for the case in recovering the natural gold in lode ore with 65% of the ore having a milling size of—0.074mm, the recovery for the natural gold is expected up to 98%. For that natural gold of 0.004mm in particle size, the recovery is 97%. The cleaning up cycle is 1~4 hours. And the upgrade ratio is up to 1,000 times.