Specifications

1. UV calbe sleeve/pvc fiberglass sleeve
2. 0.5-40mm
3. BDV:1.5KV,2.5KV,4KV
4. -25-130
5. Pipe protection sleeves

PIPE/ Electrical wire insulation sleeve Wire rope sleeve

 

Foundry insulation sleeves, UV CABLE SLEEVE ,INSULATION MATERIALS Sleeves terminal AC guard 2715 PVC Fiberglass Electrical Wire Sleeve: 

 

1. Temp. -25-130°C

2. Dia: 0.5-40mm

3. Color: Blue, green, red and straw yellow spiral lines or as per customers' requests.

4. Features: Smooth appreance, felxible body, good dielectric, chemical resistance, super elasticity,  antiaging performance.

5. Technical Process: Made of non-alkly fiberglass braided sleeving coated with PVC (polyvinyl  chloride) resin under high temp.

6. Applications: For wiring , radio, motors, appliances, electric instruments or apparatus and other electric equipment.

7. Breakdown voltage: 1.5kv, 2.5kv, 4kv, 7kv.

8. Packing: 1000mm/piece, 100m/roll.

                                                           Tech. Data

 

 

Resistance to soldering heat	Pass,(only for nominal bore diameter below or under 5mm)
Bending after heating	No cracking or detachment of coating shall be visible after bending around   mandrels after 96hours at 130
Bending at low temperature	No cracking or detachment of coating shall be visible after bending around mandrels at 25
Insulation resistance	Room temperature 10MΩ Damp heat temperature 10MΩ
Flam propagation	60seconds max, in addition the indicator flag on any of the three test  specimens shall not be burned or have flaming or glowing particles or flaming drops ignite the cotton.
Temperature index	105