Specification

Bluetooth version: CSR4.0

300mAH polymer lithium battery

Bluetooth call / track switch / volume control / incoming call tones in Chinese

Transmission distance: 10 meters

Charge voltage: Micro USB 5V

Product weight: 55 grams    

Material: ABS+ PC;silica gel

Working temperature:-10℃-+60℃

Package list

Smart Anti-sleep bluetooth head-band 

Micro USB hi-fi earphone

User Manual

Safety 

1. This product can ONLY be used as for anti-sleep alarm tools during fatigue driving. Please DON’T use this product to replace normal sleep and regular rest during long distance driving.

2.The calls of Bluetooth should be as simple as possible, so as not to reduce attention in driving.

Introduction 

Thank you for choosing Wakeman smart anti-sleep drive bluetooth 

headband.This device is a high-efficient and enjoyable anti-sleep tool, especially useful for preventing drivers from sleeping on the highway. To use this device properly, and fully experience all functions, please read this manual carefully before use.

Charging

lPlease use Micro USB DC 5V adaptor ,or 5V vehicle charger to charge the device.

lThe LED indicator turns red while charging. After charging finishes, the LED indicator turns off.

lThe full charge time is about 2 hours.

lPlease turn off the device during charging.

lPlease DO NOT charge this device while wearing it.

Power ON/OFF

Push the switch to ON or OFF location.

Wearing

lAdjust the Velcro to make sure the head-band fits your head, refer to figure below for correct wearing method.

lPlug the end of earphone into the USB socket of headband, the receiver into right ear.

lPlease keep view horizontal while driving.

Bluetooth connection

Turn on the Bluetooth feature on mobile phone.

Search ” Wakeman” device

Connect mobile phone with the headband, till the Bluetooth connection is successful.

Usage

1. Active Anti-sleep

When active stimulation is in need, shake your head once. If recognized

successfully, the dual-polar vibration will start for one second to confirm the reorganization, then followed by alternating vibration.  The 3-second alternating vibration continues for 30 second. After that, the device will enter into and keeps at 10-second alternating vibration mode.

When vibration is not needed, shake your head once to stop it. If recognized

successfully, the dual-polar vibration will start for one second to confirm the reorganization. After that the vibration will stop.  

2.View Angle Reminding

If the driver starts to nod due to driving fatigue and the head-down angle exceeds 15 degrees, the device starts fast dual-polar alternating vibration immediately to remind the driver to keep horizontal view angle. The vibration stops after the driver resumes horizontal view.

If the driver moves the head up to more than 30 degree, the device starts fast dual-polar alternating vibration immediately to remind the driver to keep horizontal view angle. The vibration stops after the driver resumes horizontal view.

3.Telephone Answering

When calling, the wearer first heard music ringtones, followed by Chinese trumpet.

If the wearer refused to listen to the call, shake his head once, heard a short song, show that the recognition of the success of the action, then the caller will be refused to listen.

If the wearer want to answer the call, just nod once, heard a short song, indicates that the action recognition success, then the call will be answered.

During the call, if the wearer want to hang up the phone, just shake his head once, heard a short song, show that the action is successful, the call will be hung up.

During the call, if the wearer to enhance the volume, just looked up once,

heard a short song, indicates that the action recognition success, the call volume will be raised a file, repeated the rise can continue to increase the volume, up to the highest gear..

During the call, if the wearer to reduce the volume, just nod once, to hear a short song, show that the action recognition success, the call volume will be reduced by a file, repeat nod can continue to reduce the volume, until the lowest gear so far.

4.Music Control

First, the wearer starts playing music on the phone.

If the wearer want to replace the track, just turn his head to right, hear a sound, indicates that the action to beidentified , the track will be replaced to the next song successfully. If the wearer turn his head to left, then the track will be replaced to the last song .

During music playback, if the wearer to enhance the volume, just looked up once, heard a short song, indicates that the action recognition success, the call volume will be raised a file, repeated the rise can continue to increase the volume, up to the highest gear..

During music playback, if the wearer to reduce the volume, just nod once, to hear a short song, show that the action recognition success, the call volume will be reduced by a file, repeat nod can continue to reduce the volume, until the lowest gear so far.

Smart Anti-Sleep Driver Headband

1. How much will the express delivery cost be for the samples?

A: The express delivery cost depends on the quantity, weight, carton measurement and your area.

2. How can the products be sent to us?

A: For small quantity or weight less than 20 kgs, sent usually by the express. For orders from 20 to 500 kgs, they can be sent by air to the international airport near you. For big quantity or volume, sent usually by ocean container. The transportation way depends on client's choice. Freight depends on quantity, weight, volume, transportation way,destination country (the international airport, sea port ).

Note: The items are normally shipped via FedEx, TNT, DHL, UPS, etc.

3. How soon will my order be shipped? 

A: Generally, upon the receipt of payment, the items will be shipped out within 1-3 business days. 

Note: Delivery timeline mainly depends on the quantity and carrier services.