Flexo Plate mounting machine / plate making machine / anilox roller cleaning machine for flexographic printing machine
USD $3,000 - $8,000 /Set
Min.Order:1 Set
Ruian Changhong Printing Machinery Co., Ltd.
Changhong ZX series Flexo Plate Making Machine(flexo printing machine spare parts)
Changhong Anilox roller cleaning machine (flexo printing machine spare parts)
Changhong ZX series Plate mounting machine(flexo printing machine spare parts)
CHANGHONG Brand computer control High precision vertical and horizontal cross cutting machine
Product 1: Plate Mounting Machine
I. Characteristics
1,Employed up-and
down adjustable precise screw unit, Japanse SINCO high grade amplified lens CCD camera, HF liquid crystal monitor for displayer
2,Adopted upper and down adjustable Japanese SINCO Highgrade amplifier, CCD camera and HD liquid crystal monitor for its displayer
3,The camera can be adjusted in all directions, Higher precision of printing plating adhesion and accurate registering
4,The printing plate can be stuck in telescop
5,Faster sticking the printing plate, ease of operation , higher production capacity
6,Applied to printing the relief printing materials like soft rotary printing and resin printing
II. Plate mounter operation instruction
1. Regulating Printing roller frame placed high or low, so that the printing roll and the place of loading plate frame in same place.
2. Adjust the camera place forward or back , and make the axes that ‘s in printing roll showing on the display screen in a straight line
3. Adjust the lens focal length, so that images displayed in high grade amplified lens
4. The double-sided stick on the printing roll in
5. Trample the button that in the middle of the footplate to rise the cylinder, put the printing plate placed in the placed board , move printing plate, so that cross-line position shown in the display in a line, the slow close the button on the footplate, cylinder make down , and the shift lock plate , you can start printing .
III. this machine size depends on printing machine Max. width
Product 2: Flexo Plate Making Machine
I. Characteristics
1. It is made of stainless steel, featuring in durability and won’t get rusty.
2. Opted imported Philip specific printer lamp, Philip rectifier(frequency transforming type is good for registering).
3. Imported slow reflective violet suction membrane(Japan Toyo) Computer controller enables it to be easily operated.
4. Adopted American digital intergrated thermo sensor.
5. Adopted American thermo sensor.
6. Japanese Panasonic or oriental printing plate washer, Japanese ORIX constant dry oven, featuring in strong wind.
7. Adopted Philip specific UVC light source for removing the sticking sheet.
8. Integrated exposure, washing printing plate and removing sheet, it is a good equipment for making soft printing plates.
II. Main Technical Variables
Model | Printer area | Measurement:W×D×H | power | Plate thickness |
ZX-4334 | 430*340mm | 710×610×1050mm | 2.2kw | 1-7mm |
ZX-6040 | 600*400mm | 860×710×1050mm | 2.3kw | 1-7mm |
ZX-9060 | 960*600mm | 1190×910×1150mm | 3.5kw | 1-7mm |
ZX-120100 | 1200*1000mm | 1500×1310*1160mm | 3.8kw | 1-7mm |
Product 3: Anilox roller cleaning Machine
I. Feature and advantage:
The ink cell of ceramic anilox roller is easier to be blocking by printing ink, plate, double sides adhesive tape or others after a long time printing, then it will affect the printing quality and the anilox roller normal use.
The anilox roller cleaning machine use ultrasonic produced tiny bubbles, tiny bubbles directly enter into the ink cell inside and take the rubbish ink our of ink cell of anilox roller.
II. Machine cleaning 2 methods:
1. Put the concentrated anilox roller cleaning liquid on anilox roller equably, and leave it for several hours based on the congestion degree of anilox roller. Then put the anilox roller into the anilox roller cleaning machine to clean it, finally use clean water cleaning it.
2. Directly mixture the cleaning liquid with water according to the proportion of blending, then put the anilox roller into this machine to clean. Use ultrasonic anilox roller cleaning machine, more cleaning speed, perfect cleaning effect, no harmful for anilox roller.
III. Machine Main material:
1. Machine inside groove adopts #304 stainless stell plate, waterproof welded, strong surface corrosion resistance, beautiful appearance.
2. Adopts high Q value transducer, ultrasonic uniform, stability.
3. Adopts Japan good bonding technology, and Switzerland imports of adhesive gule.
4. Good control rotating mechanism to adjust the anilox roller rotating time and stop cleaning time, then improve the cleaning efficiency and cleanliness, no hurt anilox roller.
5. Use new thicken heating plate, high heat efficiency, long service life.
6. Digital controller with good appearance, simple operation,convenient to operate the time, efficiency.
IV. this machine size depends on printing machine Max. width
HOT PRODUCTS: